Connecting the audiovisual equipments

Connecting your TV

To enjoy the programs coming from your audiovisual equipments such as VCR, DVD, Satellite receiver, Camcorder, Audio amplifier and etc, the signal must be received by the set via the AV input terminals at rear. You can also record the TV programs to a video tape by VCR. Connect the devices as the following figure.

Note:

1.The program coming through AV input terminals can't be re-recorded via AV output terminals. 2.When the TV is in AV mode, there is no signal output on the OUTPUT terminals.

3.When connecting S-VIDEO, Audio Left and Right cables should be connected to AUDIO INPUT terminals. Also the S-VIDEO and VIDEO INPUT terminals can't be connected simultaneously. When you want to watch TV program, please shut the S-VIDEO signal.

RECORD THE TV PROGRAM

	VIDEO		VIDEO
	L(MONO) L(MONO)
S-VIDEO	R	AUDIO	R
	INPUT	OUTPUT

From the output terminals

VCR/DVD

INPUT

VIDEO LEFT(MONO) RIGHT

OUTPUT

VIDEO LEFT(MONO) RIGHT

PLAY VIDEO TAPE, DVD etc.

To the input terminals

Connecting the aerial

To enjoy the terrestrial signal transmitted by your local TV station, you need an indoor or outdoor aerial (not supplied). Perfect picture quality requires a good signal and generally means that an outdoor aerial must be implemented. The exact type and location of the aerial will depend on your particular area. Consult your local dealer or service personnel for best advice. If you are a subscriber of your local CATV net, the outdoor or indoor aerial is not needed. Connect the equipments as the following figure.

Plug(not supplied)
REAR VIEW	COAXIAL CABLE(75¦¸)
AERIAL SOCKET		The signal comes from:
TWIN-LEAD FEEDER(300¦¸)		!	An outdoor aerial
TWIN-LEAD FEEDER(300¦¸)		!	An indoor aerial
Adaptor (not supplied)
Loosen the screw	Insert the feeder in	Tighten the screw
S-VIDEO

-6-

Connecting your TV