Mitsumi electronic LDT322V user manual Setup Procedure

Page 11

Setup Procedure

1. Determine the installation location

CAUTION:

DO NOT ATTEMPT TO INSTALL THE LCD MONITOR BY YOURSELF.

Installing your LCD display must be done by a qualified technician. Contact your dealer for more information.

CAUTION:

MOVING OR INSTALLING THE LCD MONITOR MUST BE DONE BY TWO OR MORE PEOPLE.

Failure to follow this caution may result in injury if the LCD monitor falls.

CAUTION:

Do not mount or operate the display upside down, face up, or face down.

CAUTION:

Do not install the LCD monitor where it will be exposed to direct sunlight, as this will result in display defects.

CAUTION:

This LCD has a temperature sensor and cooling fan. If the LCD becomes too hot, the cooling fan will turn on automati- cally. If the LCD becomes overheated and the cooling fan is running, the “Caution” menu will appear. If the “Caution” menu appears, discontinue use and allow the unit to cool. When the LCD monitor is used in an enclosure or with protec- tion on LCD surface, please check the inside temperature of monitor by “HEAT STATUS” (See page 29). The temperature is too hot than normal condition, please set “cooling fan” to ON on SCREEN SAVER function (See page 26).

IMPORTANT:

Lay the protective sheet, which was wrapped around the LCD monitor when it was packaged, beneath the LCD monitor so as not to scratch the panel.

2. Installing and removing the remote control batteries

The remote control is powered by 1.5V AAA batteries. To install or replace batteries:

How to install the batteries

1.Press and slide to open the cover.

2.Align the batteries according to the (+) and (–) indications inside the case.

3.Replace the cover.

•Place “AAA” batteries matching the + and - signs on each battery to the + and - signs of the battery compartment.

•Do not mix battery types.

•Do not combine new batteries with used ones. It causes shorter battery life or leakage of batteries.

•Remove dead batteries immediately to prevent battery liquid from leaking into the battery compartment. Don't touch exposed battery acid, it cause damage to your skin.

NOTE:

If you do not intend to use the Remote Control for a long period, remove the batteries.

3. Connect external equipment (See page 14-18)

•To protect the connected equipment, turn off the main power before making connections.

•Refer to your equipment user manual.

4. Connect the supplied power cord

•The power outlet socket should be installated as near to the equipment as possible, and should be easily accessible.

•Fully insert the prongs into the power outlet socket. Loose connection may cause noise.

NOTE:

Please refer to “Safety Precautions, Maintenance & Recommended Use” section of this manual for proper selection of AC power cord.

Cable Holder

How to remove the batteries

1.Press and slide to open the cover.

2.Remove the batteries.

CAUTION:

Incorrect use of batteries can result in leaks or bursting. Be careful especially about the following points.

5. Switch on the power of all the attached external equipment

When connected with a computer, switch on the power of the computer first.

6. Operate the attached external equipment

Display the signal on the external equipment you wish.

1-11

Downloaded From TV-Manual.com Manuals

Page 10 Page 12
Image 11
Page 10 Page 12
Contents LCD Display Monitor Advanced Option IndexDeclaration of Conformity Important InformationDeclaration of the Manufacturer DeclarationErgonomics Recommended UseContents Control Panel Parts Name and FunctionsDVD/HD in Y, Pb/Cb, Pr/Cr BNC Terminal PanelPIP Picture In Picture button Wireless Remote ControlHandling the remote control Operating Range for the Remote ControlSetup Procedure Recommended Adjustment Adjust the soundAdjust the screen See pages Adjust the image SeePortrait When LDT322V is installed in portrait positionHow to set-up LandscapeTo avoid monitor from falling Lay the screen face downVentilation Requirements for enclosure mounting Before making connections Wiring DiagramConnections Connect the LCD Monitor to a Personal Computer Connecting a Personal ComputerConnect the LCD Monitor to a Computer with a Digital Output Connecting with Digital Interface EquipmentRCA Connecting a DVD Player with component outConnect the LCD Monitor to a DVD Player BNC RCA Connecting to a Stereo AmplifierConnect the LCD Monitor to a Stereo Amplifier RCA BNCUsing the remote control Power on and OFF ModesPressing the Main Power Switch Pressing the power buttonAudio Source Switching Power IndicatorUsing Power Management Picture ModeVIDEOS, Video Information OSDRGB1, 2 DVD/HDOSD On-Screen-Display Controls Picture Position Zoom ModeScreen Reset ScreenPIP Picture in Picture AudioConfiguration OSD H Position OFF TimerOSD Turn OFF Information OSDIR Control Advanced OptionGamma Selection Heat Status Power on DelayAdvanced Option Reset TilingRecommendations For long life use of Public DisplayImage Sticking of LCD Panel PIP Size Small SUB RGB1 RGB2 RGB3 DVD/HD Videos MainRGB3 DVD/HD PIP POP OFFConnection Power Power onAscii HEX Power on Power OFFFeatures Troubleshooting Stripe Noise Remote Control is not availableSCHEDULE/OFF Timer function is not working properly No SoundSpecifications LDT322V SpecificationsPin Assignment

LDT322V specifications

The Mitsumi Electronic LDT322V is a cutting-edge component recognized for its versatility and efficiency in various applications. This electronic device stands out due to its exceptional technology and remarkable characteristics that cater to both professional and consumer needs.

One of the main features of the LDT322V is its high-resolution capability. It offers a crisp display that enhances visual clarity, making it an ideal choice for applications that require detailed images and graphics. The device boasts an impressive pixel resolution, which translates into sharper visual output that is essential for tasks ranging from industrial monitoring to interactive consumer applications.

In terms of technological advancements, the LDT322V integrates sophisticated processing capabilities that allow for rapid data handling and effective performance in real-time applications. Its internal circuitry is designed to optimize electrical efficiency, thereby reducing power consumption while maintaining high performance. This feature is particularly significant in today’s energy-conscious market where sustainability is a growing concern.

The device is also equipped with a user-friendly interface that simplifies interaction for operators. The intuitive design ensures that users can navigate through functions effortlessly, reducing the learning curve associated with new technology. This aspect is vital in environments where time is of the essence, such as in medical settings or to streamline workflows in manufacturing processes.

Furthermore, the LDT322V is designed with durability in mind. Its robust construction allows it to withstand harsh environments, making it suitable for various industrial applications. The reliability of the device ensures minimal downtime, contributing to greater productivity in any setting.

Mitsumi has prioritized connectivity in the LDT322V, offering multiple interface options that enable seamless integration with other devices. This characteristic enhances its functionality, allowing for extensive applications in automation systems, control panels, and more.

Overall, the Mitsumi Electronic LDT322V combines advanced technological features with practical applications, making it an excellent choice for users seeking a reliable and efficient electronic component. Its high-resolution display, energy-efficient performance, user-friendly design, and robust reliability make it a standout option in the ever-evolving landscape of electronic devices.
Top Page Image Contents