Mitsumi electronic LDT322V user manual Lay the screen face down, To avoid monitor from falling

Page 14

How to Mount and Attach Options to the LCD Monitor

1. Lay the screen face down

394.5

 

 

394.5

Protective

100

100

100

100

 

 

 

 

Sheet

 

 

 

 

100

253.15

 

 

 

 

 

 

 

 

 

100

223.15

 

 

 

 

 

(mm)

Table

 

 

 

 

 

Lay the protective sheet on a table, which was wrapped around the monitor when it was packaged, beneath the screen surface so as not to scratch the screen face.

This device cannot be used or installed without the Tabletop Stand or other mounting accessory. Failure to follow correct mounting procedures could result in damage to the equip- ment or injury to the user or installer. Product warranty does not cover damage caused by improper installation.

Failure to follow these recommendations could result in void- ing your warranty.

When using with other mounting accessory, the screws must be M6 of size and 10 mm or longer of length under consid- eration of the thickness of the mounting method. Tighten the screws securely. (Torque : approx. 5.49 N·m) Prevent the screws from loosening using spring washers, etc. MITSUBISHI ELECTRIC recommends using mounting inter- face that comply with TÜV-GS and/or UL1678 standard in North America.

2.Ventilation Requirements for enclosure mounting

To allow heat to disperse, leave space between surrounding objects as shown in the diagram below.

3. To avoid monitor from falling

When installing the monitor using the tabletop stands (op- tional), take measures to prevent it from falling over in case of an earthquake or other disaster to lessen the probability of injury and damage resulting from fall.

As shown in the figure, secure the monitor to a solid wall or pillar using rope (commercially available) strong enough to bear the weight of the monitor. (LDT322V : approx. 15.7 kg (with the optional stands))

When you use screw hooks (commercially available), ring screw hooks, not C-shaped screw hooks (with opening), are recommended.

 

 

 

 

 

 

 

 

Screw hook, etc.

 

 

360 mm

 

commercially available

 

 

Screw Holes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rope, etc.

commercially available

ClamperScrew

Before moving the LCD monitor, the cord or chain should be removed.

Caution:

•Install the monitor with metal brackets for wall or ceiling installation (commercially available) on your own respon- sibility. For detailed procedures of installation, refer to the instructions of the metal brackets.

•The effectiveness of preventing from falling substantially depends on the strength of brackets and base to which prevention device from falling is attached. When you cannot ensure sufficient strength, provide adequate reinforcement.

•Though the recommended prevention from falling is intended to lessen the probability of injury and damage, it doesn’t assure its effectiveness against any kind of earthquake or disaster.

•To lessen the probability of injury and damage resulting from fall of the monitor in case of earthquake or other disaster, be sure to consult the bracket manufacturer for installation location.

•Do not sleep where the monitor may topple over or fall in case of an earthquake or other disaster.

•Before moving the monitor, remove the rope that is securing the monitor. Failure to do so may result in injury or breakdown of the monitor.

English

1-14

Downloaded From TV-Manual.com Manuals

Page 13 Page 15
Image 14
Page 13 Page 15
Contents LCD Display Monitor Index Advanced OptionImportant Information Declaration of ConformityDeclaration Declaration of the ManufacturerRecommended Use ErgonomicsContents Parts Name and Functions Control PanelTerminal Panel DVD/HD in Y, Pb/Cb, Pr/Cr BNCWireless Remote Control PIP Picture In Picture buttonOperating Range for the Remote Control Handling the remote controlSetup Procedure Adjust the image See Adjust the soundAdjust the screen See pages Recommended AdjustmentLandscape When LDT322V is installed in portrait positionHow to set-up PortraitTo avoid monitor from falling Lay the screen face downVentilation Requirements for enclosure mounting Before making connections Wiring DiagramConnections Connecting a Personal Computer Connect the LCD Monitor to a Personal ComputerConnecting with Digital Interface Equipment Connect the LCD Monitor to a Computer with a Digital OutputRCA Connecting a DVD Player with component outConnect the LCD Monitor to a DVD Player RCA BNC Connecting to a Stereo AmplifierConnect the LCD Monitor to a Stereo Amplifier BNC RCAPressing the power button Power on and OFF ModesPressing the Main Power Switch Using the remote controlPicture Mode Power IndicatorUsing Power Management Audio Source SwitchingDVD/HD Information OSDRGB1, 2 VIDEOS, VideoOSD On-Screen-Display Controls Picture Screen Zoom ModeScreen Reset PositionAudio PIP Picture in PictureConfiguration Information OSD OFF TimerOSD Turn OFF OSD H PositionIR Control Advanced OptionGamma Selection Tiling Power on DelayAdvanced Option Reset Heat StatusRecommendations For long life use of Public DisplayImage Sticking of LCD Panel PIP POP OFF SUB RGB1 RGB2 RGB3 DVD/HD Videos MainRGB3 DVD/HD PIP Size SmallConnection Power OFF Power onAscii HEX Power on PowerFeatures Troubleshooting No Sound Remote Control is not availableSCHEDULE/OFF Timer function is not working properly Stripe NoiseSpecifications Specifications LDT322VPin Assignment

LDT322V specifications

The Mitsumi Electronic LDT322V is a cutting-edge component recognized for its versatility and efficiency in various applications. This electronic device stands out due to its exceptional technology and remarkable characteristics that cater to both professional and consumer needs.

One of the main features of the LDT322V is its high-resolution capability. It offers a crisp display that enhances visual clarity, making it an ideal choice for applications that require detailed images and graphics. The device boasts an impressive pixel resolution, which translates into sharper visual output that is essential for tasks ranging from industrial monitoring to interactive consumer applications.

In terms of technological advancements, the LDT322V integrates sophisticated processing capabilities that allow for rapid data handling and effective performance in real-time applications. Its internal circuitry is designed to optimize electrical efficiency, thereby reducing power consumption while maintaining high performance. This feature is particularly significant in today’s energy-conscious market where sustainability is a growing concern.

The device is also equipped with a user-friendly interface that simplifies interaction for operators. The intuitive design ensures that users can navigate through functions effortlessly, reducing the learning curve associated with new technology. This aspect is vital in environments where time is of the essence, such as in medical settings or to streamline workflows in manufacturing processes.

Furthermore, the LDT322V is designed with durability in mind. Its robust construction allows it to withstand harsh environments, making it suitable for various industrial applications. The reliability of the device ensures minimal downtime, contributing to greater productivity in any setting.

Mitsumi has prioritized connectivity in the LDT322V, offering multiple interface options that enable seamless integration with other devices. This characteristic enhances its functionality, allowing for extensive applications in automation systems, control panels, and more.

Overall, the Mitsumi Electronic LDT322V combines advanced technological features with practical applications, making it an excellent choice for users seeking a reliable and efficient electronic component. Its high-resolution display, energy-efficient performance, user-friendly design, and robust reliability make it a standout option in the ever-evolving landscape of electronic devices.
Top Page Image Contents