Warning: To prevent a shock hazard when you replace the fuse, be sure the VCP is turned off and its power is discon- nected.
Follow these steps to replace the fuse.
1.Unscrew the fuse compartment cap (FUSE) on the back of the VCP, then remove the cap. The fuse stays in the cap when you remove it from the compartment.
2.Remove the old fuse and place a new fuse in the cap. Then replace the cap and screw it back into the compartment.
22
THE FCC WANTS YOU TO KNOW
Your VCP might cause TV or radio inter- ference even when it is operating proper- ly. To determine whether your VCP is causing the interference, turn off your VCP. If the interference goes away, your VCP is causing the interference. Try to eliminate the interference by:
•Moving your VCP away from the TV or radio.
•Connecting your VCP to an outlet that is on a different electrical circuit from the TV or radio.
•Contacting your local Radio Shack store for help.
If you cannot eliminate the interference, the FCC requires that you stop using your VCP.