Optimus 112 (16-549), 113 (16-550) Changing the On-Screen Language, Resetting the VCR’s Memory

16-549.fm Page 18 Tuesday, July 20, 1999 5:04 PM

2.Repeatedly press PLAY or STOP to high- light SET UP CHANNEL, then press

FAST-F.

NEL

E: ENGL I SH

Y

3.Press FAST-Fagain to select the broadcast system (TV or CATV).

SET UP CHANNEL

ANTENNA SYSTEM : CATV

AUTO SET

SELECT : KEY

SET	: KEY
END	: MENU KEY

4.Press STOP to highlight AUTO SET, then press FAST-F.

AUTO SET

A CABLE

A CABLE

YOUR

THEN. . .

UP KEY

5.Press CH s. The VCR starts scanning for and storing active channels.

NEL

UE: ENGL I SH

Y

English

GE: ESPANOL

Espanõl

OSCOPE

E

A: FRANÇA I S

Franç ais

3.Press FAST-Fso the desired language appears next to the fourth item.

4.When you finish selecting the language you want, press MENU.

Changing the On-Screen Language

The on-screen programming language is pre- set to English, but you can change it at any time by following these steps.

1.Press MENU to display the main menu.

2.Repeatedly press PLAY or STOP to high- light the fourth menu selection, then press FAST-F. The title of the fourth menu selec- tion differs depending on the language cur- rently selected.

18

Resetting the VCR’s Memory

If at any time you want to erase all settings, in- cluding the time, local channels, and pro- grammed events, eject any loaded tape, then hold down PLAY and CHANNEL s on the VCR for about 5 seconds until it turns itself off. All settings are cleared.

The next time you turn on the VCR, it performs its initial setup sequence. See “Setting the On-

Screen Language/Channels/Clock” on Page 15.