Optimus 112 (16-549), 62 (HI-FI) (16-632), 113 (16-550) Installation, Common Connections

Page 9

16-549.fm Page 9 Tuesday, July 20, 1999 5:04 PM

INSTALLATION

COMMON CONNECTIONS

Refer to the illustrations on Page 10 (Model 62) or 11 (Model 112/113) for these connections.

Note: Some connections shown in this section might require additional supplies, available from your local RadioShack store.

þConnect the VCR to your TV for playback. You can connect (choose one):

•Your VCR’s OUT TO TV jack to your TV’s antenna jack, using a 75-ohm coaxial cable

Caution: Never connect the VCR’s OUT TO TV jack to a terminal that has an antenna already connected. Doing so can interfere with other receivers.

•Your VCR’s OUT TO TV jack to your TV’s separate VHF/UHF antenna jacks, using a 75-ohm coaxial cable and a VHF/UHF splitter/combiner

•Your VCR’s AUDIO/VIDEO OUT jacks to your TV’s audio/video jacks, using a stereo audio/video cable

Note: For the best quality recordings, use high-quality A/V cables to make these connections.

ÀConnect a signal source to the VCR for recording. You can connect (choose one):

•An outside antenna, using a 75-ohm coaxial cable, to the VCR’s IN FROM ANT jack

•An outside antenna, using 300-ohmlead-in wire and a 300-to-75 ohm transformer, to the VCR’s IN FROM ANT jack

•Your CATV (cable) source, using the 75-ohm coaxial cable directly from the cable company, to the VCR’s IN FROM ANT jack

Caution: Some state laws restrict direct connections to cable wires (connections that do not go through a cable box). Check the laws in your area before you make connections.

•A cable converter box to the VCR’s IN FROM ANT jack

Note: There are many cable TV sys- tems in use. If you subscribe to cable TV service and cannot record cable TV programs, contact your local cable TV service provider. Most cable TV service providers offer connection help.

ÃYou can also connect an optional video source, such as a camcorder, another VCR, or a DSS system to your VCR using A/V cables. Simply connect it as shown.

Connection Notes:

•You can connect two video sources (three sources for the Model 62) directly to your VCR. To do so, you connect one source to the AUDIO IN 1/VIDEO IN 1 jacks on the back of the VCR using A/V cables and the other to the IN FROM ANT jack using a 75- ohm coaxial cable (and, with the Model 62, another source to the AV2 AUDIO/VIDEO IN jacks on the front of the VCR, see “Cam- corder Connections” on Page 13).

•You can connect additional 75-ohm coaxial sources to your system using a high-isolation A/B switch to switch between the sources.

•You can connect one 75-ohm coaxial source to more than one device using a video splitter.

Because of the complexity of the variations possible when using additional video accesso- ries, such as video signal switches, splitters, and combiners, such configurations are not shown in this manual.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Head VHS HQ VCR Important Safety Instructions Fm Page 3 Tuesday, July 20, 1999 504 PM Tuning FeaturesRECORDING/PLAYBACK Tape ControlOther Features Contents Direct Access Index Search Index Scan Using this Manual Supplied AccessoriesBefore YOU Begin Moisture CondensationCommon Connections InstallationCable Box Model 62 ConnectionsModels 112/113 Model 112/113 ConnectionsCatv Home Theater Connections Model 62 ShownCamcorder Connections Connecting PowerSetting the VCR’S Output Channel Switch VCR SetupRemote Control Installing BatteriesSetting the On-Screen Language/ Channels/Clock Initial SET UP1200PM Manually Setting the ClockTurning On Auto Clock Set Adding/Erasing ChannelsReprogramming Tuner Memory Changing the On-Screen Language Resetting the VCR’s MemoryTV Brand Code Using the VCR Remote Control with Your TV or Cable BOXFm Page 20 Tuesday, July 20, 1999 504 PM Using the VCR’s Tuner Using the TV’s TunerOperation Watching TVViewing a Video Tape Loading a Video TapePlaying a Video Tape Special Functions Special DisplaysTape Motion Controls Using the Zero Search Function Using the CounterREAL-TIME Counter Slow MotionDirect Access Index Search Using Index SearchRepeat Play Index ScanTracking Recording Recording SPEEDS/TAPE SelectionErase Protection Selecting the Signal to Record Immediate RecordingRecording a Program As You Watch It Automatic Timer Recording 200P Setting a TimerChecking/Changing Timers Monitoring an Automatic Timer RecordingDubbing Clearing a TimerAUDIO-ONLY Recording Model 62 only Additional Information TroubleshootingFm Page 35 Tuesday, July 20, 1999 504 PM Care and Maintenance Cleaning the Video Heads Servicing Your VCRStoring Your Video Cassettes Specifications Frequency Response Regular Audio 80 Hz-10 kHz 80 Hz-5 kHz RadioShack Division of Tandy Corporation Fort Worth, Texas
Top Page Image Contents