Note: To record without a set duration, skip Step 9.
9.Press REC/TIME again. The recording length appears on the TV screen. Repeat- edly press REC/TIME to advance the timer to the desired recording length. The recording length advances in
Notes:
•To ensure that you record the entire pro- gram, set the recording length longer than the program length.
•To display the remaining recording time, press DISP/ENT during a timed recording.
•To temporarily stop the tape during a recording, press PAUSE. Press PAUSE again to resume recording. If you leave the VCR paused for about 5 minutes, the VCR automatically stops.
•If the cassette’s erase protection tab has been removed, the VCR displays
CHECK CASSETTE RECORD TAB and ejects the cassette. Use another cas- sette, or place a piece of heavy plastic tape over the
10.Press STOP to stop recording at any time.
Recording One Program on the VCR While You Watch Another on the TV
1.Follow Steps 1– 9 of “Recording a Program as You Watch It” on Page 28.
2.Repeatedly press TV/VCR until VCR disap- pears.
Note: If you are watching the program on a TV/monitor that is connected to the VCR’s AUDIO/VIDEO OUT jacks, set the TV/moni- tor to the TV mode.
3.Set the TV tuner to the channel you want to watch.
4.Press STOP to stop recording at any time.
AUTOMATIC TIMER
RECORDING
The VCR’s automatic timer lets you program it to select an input source, start recording from that source at a time you set, then stop record- ing at a time you set. You can set up to eight timers to record any combination of weekly, daily, or
You can set the VCR to record at any time on a specific day within a
Notes:
•The VCR can record only one broadcast at a time. If you set the VCR’s timer to record broadcasts on different channels that start at the same time, the VCR only records the broadcast that has the lowest timer num- ber (see “Checking/Changing Timers” on Page 31).
•If two timer settings overlap, the one that starts first has priority. The VCR begins recording the second broadcast after the set time for the first broadcast is over.
•The VCR must be off at the start time you set for it to begin an automatic timer recording.
•If there is a power failure of more than 30 minutes during a timer recording, the recording does not resume after power is restored.
•If there is a power failure of more than 30 minutes before a start time, the VCR loses the clock setting and therefore does not start automatic timer recording. However, if you have an EDS channel in your area and set the VCR to automatically set the clock from the EDS signal, the clock is reset within 10 minutes after power is restored, and the VCR records at the set time(s). See “Turning On Auto Clock Set” on Page 17.
29