Optimus 63, 114 owner manual 200P

16-551.fm Page 36 Tuesday, July 20, 1999 5:13 PM

4. Press PROG. You see:

SET PROGRAM

VCR P l u s + PROGRAM

T I MER PROGRAM

SELECT : KEY

SET	: KEY
END	: MENU KEY

Note: If the clock is not set, PLEASE SET CLOCK BEFORE PROGRAMMING ap- pears, then the clock-setting screen ap- pears. Set the clock as described in “Man- ually Setting the Clock” on Page 16, then continue with Step 5.

5.Press PLAY or STOP to highlight VCR Plus+ PROGRAM, then press FF. You see the PlusCode entry screen.

s +

NUMBER

EYS

Y

Note: If you try to enter more than eight timer programs, you see:

TIMER PROGRAMS ARE FULL

TO ENTER A NEW PROGRAM

PLEASE ERASE ONE PROGRAM

See “Clearing a Timer” on Page 40.

6.Find the PlusCode in your television guide for the broadcast you want to record, then use the number keys on the remote control to enter the PlusCode.

s +

E NUMBER

KEYS

Y

Y

36

Note: If you make a mistake while entering a PlusCode, repeatedly press REW to delete the PlusCode number, then enter the correct numbers.

7. Press PROG. You see:

VCR P l u s +

1ONE T I ME

2DA I LY (MON-FR I )

3WEEKLY

TO SELECT PUSH 1 , 2 OR 3

END : PROG KEY

8.Press 1, 2, or 3 on the remote control to select the desired program mode. You see the recording time and date corresponding to the PlusCode you entered.

STOP CH

2:00P 125

SLP

D SPEED

KEY

Y

Notes:

•INVALID ENTRY flashes under the PlusCode on the TV screen for either of the following reasons:

—Invalid PlusCode

—The PlusCode and program mode do not match (such as entering a Plus- Code for a Saturday broadcast and selecting the DAILY (Monday-Friday) program mode).

•To erase a VCR Plus+ program, press

ADD/DLT.

9.If you want to change the displayed tape speed, press SPEED on the remote control until the speed you want (SP, LP, or EP) appears.