Optimus 63, 114 Before YOU Begin, Supplied Accessories, Moisture Condensation, Using this Manual

Page 8

16-551.fm Page 8 Tuesday, July 20, 1999 5:13 PM

BEFORE YOU BEGIN

SUPPLIED ACCESSORIES

Be sure to remove the remote control and 75- ohm coaxial cable before you store the packing material.

Depending upon your audio/video system set- up, you might need additional cables or adapt- ers (available at your local RadioShack store). Read “Installation” on Page 9 to determine your specific needs.

MOISTURE CONDENSATION

Condensation inside the VCR can cause tape jams or video head damage. When you move the VCR from a cold area to a warmer one, let it sit for about 2 hours before you plug it in and begin operation. This allows any moisture in- side the VCR to completely evaporate.

USING THIS MANUAL

This manual has these major sections:

Installation — shows you how to connect the VCR to your audio/video system and a cam- corder.

VCR Setup — includes procedures for setting the output channel switch, preparing and using the remote control, setting the on-screen pro- gramming language, setting the channels your VCR can tune, and setting the clock.

Operation — explains how to watch TV using the TV’s or VCR’s tuner, load and play a video tape, fast-forward and rewind a tape, use the VCR’s special playback, display, and search features, use the real-time counter and the zero search function, and set the tracking man- ually.

Special Functions — describes what appears on the VCR’s display and the TV screen, how to use the VCR’s Commercial Advance and Movie Advance features, use index search, and use repeat play.

Recording — describes the different recording methods.

Additional Information — includes a trouble- shooting section, care and maintenance proce- dures, and the VCR’s specifications.

We recommend you thoroughly read at least “Installation” on Page 9 and “VCR Setup” on Page 14, to be sure you correctly install and set up your VCR.

When reading through this manual, keep the following in mind:

Some buttons on the remote control also appear on the VCR. You can use these buttons to operate the same functions. Other procedures use only the VCR’s but- tons, or only the remote control’s.

Some buttons are labeled differently on the VCR and on the remote control. Since you use the remote control most often to change settings and functions, this manual refers only to the remote control’s labels. Unless otherwise noted, however, you can use either the remote control’s or the VCR’s buttons at any time.

All buttons, switches, and jacks on the VCR and all buttons on the remote control are shown in BOLD UPPERCASE letters in this manual.

Information that appears on the TV screen is shown in this typeface: PLAY

Information that appears on the VCR’s dis- play is shown in this typeface: VCR

The VCR displays menus and options on the TV you connect it to, and other infor- mation (such as tape motion indicators, the real-time counter, etc.) on its display.

If a menu disappears before you finish entering information, simply locate the step where you first pressed MENU on the remote control, then repeat that step and all steps that follow.

8

Image 8
Contents Head VHS HQ VCR Important Safety Instructions Product RECORDING/PLAYBACK FeaturesTuning Other Features Tape ControlContents Function Indicators Supplied Accessories Using this ManualBefore YOU Begin Moisture CondensationInstallation Common ConnectionsModel 63 Connections Cable BoxModel 114 Connections Optional Camcorder/2nd VCR/DSS SystemHome Theater Connections Model 63 Shown CatvConnecting Power Camcorder ConnectionsVCR Setup Setting the VCR’S Output Channel SwitchRemote Control Installing BatteriesInitial SET UP VCR CABLE/DSS BOX TVManually Setting the Clock Auto SET1200PM Adding/Erasing ChannelsReprogramming Tuner Memory Auto Clock SET IncompleteSetting the Cable Box Turning On Auto Clock SetResetting the VCR’s Memory Changing the On-Screen LanguageUsing the VCR’S Remote Control with Your TV or Cable BOX TV Brand CodeFm Page 22 Tuesday, July 20, 1999 513 PM Viewing a Video Tape OperationWatching TV Fast-Forward/Rewind and Visual Search Tape Motion ControlsPlaying a Video Tape Using the Counter Using the Zero Search FunctionREAL-TIME Counter Freeze-Frame/Frame AdvanceTracking Skipping Commercials Special FunctionsSpecial Displays Stop to highlight SET UP COMMER- Cial ADV Marking an Unmarked TapePlaying Back with Commercial Advance Marking Questions and Answers about Commercial AdvanceSKIPPING/SELECTING Previews Using Index Search Direct Access Index SearchRepeat Play Index ScanErase Protection RecordingRecording SPEEDS/TAPE Selection Recording a Program As You Watch It Selecting the Signal to RecordImmediate Recording Setting the VCR Plus+ Guide Channels Recording with VCR PLUS+Timer Recording with VCR Plus+ SET UP CHANNEL, then press FF200P Automatic Timer Recording Checking/Changing VCR Plus+ ProgramsSetting a Timer SATSAT Clearing a Timer Monitoring an Automatic Timer RecordingChecking/Changing Timers Dubbing AUDIO-ONLY Recording Model 63 onlyTroubleshooting Additional InformationVCR Care and Maintenance Storing Your Video Cassettes Cleaning the Video HeadsServicing Your VCR Specifications Frequency Response Regular Audio Hz-10 kHz Hz-5 kHz Fm Page 48 Tuesday, July 20, 1999 513 PM Fm Page 49 Tuesday, July 20, 1999 513 PM Fm Page 50 Tuesday, July 20, 1999 513 PM Fm Page 51 Tuesday, July 20, 1999 513 PM RadioShack Division of Tandy Corporation Fort Worth, Texas