Appendix
Troubleshooting
Before calling a service technician, please check the following table for a possible cause of the problem and some solutions.
Symptoms |
| Possible Solutions | |
|
| ||
TV will not turn on | Make sure the | power cord is plugged in, then press [POWER]. | |
The remote control batteries may be dead. Replace the batteries. | |||
| |||
|
| ||
| Check if you | have set the off timer. | |
No picture, no sound | Check the | antenna/cable connections. | |
| Press [DISPLAY] to see if you have select the right signal source. | ||
|
| ||
No sound, picture OK | The sound may be muted. Press [ >] on the remote control or . | ||
The station may have broadcast difficulties. Try another channel. | |||
| |||
| Check the speakers cable connections. | ||
|
| ||
Poor sound, picture OK | The station may have broadcast difficulties. Try another channel | ||
|
| ||
| Check the antenna connections. | ||
Poor picture, sound OK | The station may have broadcast difficulties. Try another channel. | ||
| Adjust the picture from the menu. | ||
|
| ||
Unable to select a certain channel | The channel may be skipped. See SKIP on page 14. | ||
|
| ||
Poor color or no color | The station may have broadcast difficulties. Try another channel. | ||
Adjust the HUE and COLOR in the menu. | |||
| |||
|
| ||
| There may be | an obstruction between the remote control and the | |
The remote control does not operate | remote control | sensor. | |
The batteries | may be installed with a wrong polarity. | ||
| |||
| The remote control batteries may be dead. Replace the batteries. | ||
|
|
| |
Disorder display at power on
This may be caused by too short interval between power off and on. Unplug the power and restart.
- 39 -