Preparation for Using your new TV
Connecting to a Computer
You can use your TV as a monitor/speakers for your computer by connecting through its 15pin standard RGB interface and PC audio interface. Connect the devices as shown below.
PC/NB
To speaker |
|
| To VGA |
|
| RGB line | |
|
|
|
Audio line
Connecting to an antenna
VIDEO | L | R | VIDEO |
| L | R |
| PC AUDIO | |
INPUT | INPUT | OUTPUT |
|
| INPUT | ||||
To enjoy the terrestrial signal transmitted by your local TV station, you need an indoor or outdoor antenna (not supplied). Perfect picture quality requires a good signal and generally means that an outdoor antenna must be used. The exact type and location of the antenna will depend on your particular area. Consult your local dealer or service personnel for best advice. If you are a subscriber of your local CATV net, the outdoor or indoor antenna is not needed. Connect the equipments as the following figure.
Plug(not supplied) | COAXIAL CABLE (75 ) |
|
TWIN-LEAD FEEDER(300 )
Adaptor (not supplied) |
|
Loosen the screw | Insert the feeder in |
The signal comes from: An outdoor antenna An indoor antenna CATV net
Tighten the screw
ANTENNA SOCKET
ANT 75 
- 8 -