DVD Player or other peripheral digital source equipment
Equipment with Component Video Output Connectors (YPbPr)
DIGITAL AUDIO
ANTENNA | AUDIO |
| AUDIO |
| L | OUT | L |
75HDMIDVI | IN2 IN1 |
| |
|
|
| R |
| R | EXT 1 | EXT 2EXT 3OUT |
|
| Pr Pb Y |
|
| EXT 4 |
| DIGITAL |
|
|
| AUDIO |
|
| 1 | 2 IN 1/2 |
YPbPr
....
....
&Connect the three separate component video cables 1 to the peripheral equipment having component video outputs (YPbPr), such as
Note: EXT4 should always be used together with digital audio.
éConnect the audio cable 2 to the DIGITAL AUDIO OUT of the peripheral equipment and to one of the DIGITAL AUDIO IN connectors of the TV.
Notes
- If necessary, you can adjust the picture position to the centre of the screen with the cursor keys.
-The labels for the component video sockets may differ depending on the DVD player or the peripheral equipment connected. Although the abbreviations may vary, the letters B and R stand for the blue and red component signals, respectively, and Y indicates the luminance signal. Refer to the DVD player’s or peripheral equipment instructions for use for definitions and connection details.
-This television is designed to accept high definition signal standards 480p, 576p, 720p and 1080i as specified by the Electronic Industries Association standard EIA770.3.
Digital peripheral equipments from different manufacturers have the possibility of differing output standards which may cause difficulties for the television to properly display.
Warning: in case you notice scrolling images, wrong colours or no colour, no picture, or even combinations of these on your screen, check if the connections are done in the correct way or move your digital equipment further away from your TV.
26