O2 Innovations 3800TW Reception of DVB-T digital broadcasting, Menu offers four folders

Page 10

O2 TV/technical settings

 

O2 TV/technical settings

The set-top box itself has a technical settings MENU:

 

Troubleshooting

 

• Using the

button, you can switch the set-top box to standby mode.

 

1.

If there is a problem with the operation of the O2 TV service, first check

 

• Press

again to turn on the set-top box.

 

 

 

that the modem and the set-top box are connected properly.

 

• When a blue screen appears, press the

button.

 

2.

If the problems persist, restart the set-top box using the

button

Use the remote control arrow buttons to navigate the MENU.

 

 

on the front panel. Resetting takes about 30 seconds.

 

 

 

 

 

The MENU offers four folders:

 

 

3.

If restarting the set-top box does not help, we recommend disconnecting

 

 

 

it and the modem from the power outlet for about 30 seconds. After this

 

 

 

 

 

NETWORK – information about the set-top box network connection. Digital values in the

 

 

time, connect the modem first and wait until the modem is synchronized

 

 

 

 

 

 

 

adjacent picture are only examples; every set-top box has its own individual setting. We

 

 

(the ADSL/DSL light is on), then connect the set-top box.

 

 

 

 

 

 

 

recommend that you do not change this setting, as the service will stop working.

4.

If that does not solve the problem, call our toll-free line at 800 184 084.

 

 

 

TV SET – the option to set the screen size ratio (4:3 or 16:9) and choose HDMI output.

SOUND – the option to set the sound

 

 

Reception of DVB-T digital broadcasting

aerial cable

OTHERS – information about set-top box software and hardware.

 

1.

DVB-T signal reception depends on the coverage at your residence.

 

 

 

 

 

 

To return to the O2 TV service, press the

button.

 

 

Up-to-date information about DVB-T signal coverage can be found on

 

Note:

 

 

 

the Internet.

 

 

 

 

 

 

If you use the additional Multi service, you must make sure that DHCP is selected in the IP address space of both set-top

Ilustrační obrázek

2.

Make sure that you have the TV aerial connected to the aerial input

 

boxes. The Multi service cannot run on a static IP address.

 

 

 

 

 

 

marked “RF IN” on the rear panel of your set-top box.

18

coaxialSCART

cablecable

19

Technical settings

Image 10
Contents O2 TV digital television Discover a new dimension of television Digital television with many functionsSet-top box/package contents Modem/package contentsSet-top box/rear panel and connection option Set-top box/connection in three stepsSet-top box/O2 TV connection Set-top box/Multi connection O2 TV connectionSet-topbox/first-time operation Set-top box/remote control To navigate the service MENU, use the arrow buttons O2 TV/service guideYou can select these services with shortcut buttons Videotéka Video Library/ordering a filmHBO Digital TV channels watching TV broadcastsTV průvodce TV Guide Information about TV program TV archiv TV Archive missed programsMy services/settings Reception of DVB-T digital broadcasting Menu offers four foldersWhy doesn’t the set-top box remote control work? O2 TV/technical settingsTuning DVB-T via the O2 TV Menu Why is my screen black and white?Why is the picture too wide or too narrow? Why are there only stripes on my screen?Why doesn‘t the sound work? More information and contacts