Seal-a-Meal VS240 warranty How To Vacuum Seal With Seal-A-Meal Bags

VS230_VS240_07EM1.qxd:VS230_VS24006EM1p.qxd 10/11/07 7:05 PM Page 7

HOW TO MAKE CUSTOM SIZED BAGS WITH THE INTEGRATED BAG ROLL (CONT.)

8.When the motor stops and the Progress Indicator Lights shut off, sealing is complete.

9.Press the Open/Cancel button.

10. The custom sized bag is ready for vacuum sealing.

NOTE: The Open/Cancel button can be used to cancel the process mid-cycle and open the Lid. The bag will not be sealed when doing this.

CAUTION: This sealer is not for commercial use. If sealing more than 30 bags or canisters in a row wait at least 25 minutes before continuing to use your vacuum food sealer.

CAUTION: The unit has a cool down period between cycles. Wait 20 seconds before using again.

HOW TO VACUUM SEAL WITH SEAL-A-MEAL®BAGS

1.Place the items to be sealed into a pre-cut or custom sized bag. Leave at least 3 inches between the contents and the top of the bag to allow for bag contraction.

2.Open the Lid and place the open end of the bag down into the Drip Tray.

3.Close Lid.

4.Change Press to Select the appropriate Seal Level – Choose Moist for foods with high liquid content or Regular for dry foods.

5.To begin the vacuum process, press down firmly on Lid with both hands and hold until the motor starts. Continue to hold the Lid. When the Hands-free Indicator Light illuminates, it is safe to remove hands from the Lid. The unit continues to vacuum and seal the bag.

HOW TO VACUUM SEAL WITH SEAL-A-MEAL®BAGS (CONT.)

6.When the motor stops and the Progress Indicator Lights shut off, sealing is complete.

7.Press the Open/Cancel button.

8. Lift the Lid and remove the bag.

NOTE: The Open/Cancel button can be used to cancel the process mid-cycle and open the lid. The bag will not be sealed when doing this.

CAUTION: This sealer is not for commercial use. If sealing more than 30 bags or canisters in a row wait at least 25 minutes before continuing to use your vacuum food sealer.

CAUTION: The unit has a cool down period between cycles. Wait 20 seconds before using again.

HOW TO VACUUM SEAL WITH SEAL-A-MEAL®ACCESSORIES

1.Firmly insert one end of the Accessory Hose that came with your Lightweight On-the-Go container into the Accessory Hose Adapter.

2.Attach the other end of the Adapter into the Accessory Port.

3. Attach the Accessory Adapter over the Vacuum Valve on the Container Lid.

-6- -7-