Panasonic NV-FJ630PMP, NV-SJ430PMP manual Cable Connection

Page 10

Cable Connection

Cable-VCR-TV (For CATV/PAY Channels Recording/Playback)

The VCR has an extended range, and can tune the Low-Band, Mid-Band, Super-Band, Hyper- Band, Ultra-Band, and Special cable channels (Channels A-5–A-1, A–W, AA–FFF, GGG– WWW, WWWr1–WWWr12, 100–125, 5A). Also, the VCR can tune to any of the 56 UHF channels (14–69). Refer to Storing TV Broadcasts in your VCR on page 13.

BASIC Hook-Up

Since the VCR can tune Mid and Super Bands, this connection will provide the reception of all cable channels except those which are intentionally scrambled.

75 ohm Coaxial Cable

However, if you subscribe to a special channel which is scrambled you will probably have a descrambler box for proper reception. The VCR by itself cannot properly receive a scrambled program since it does not contain a descrambler. In order for the VCR to properly receive a scrambled program, your existing descrambler must be used. There are two commonly used methods of connection in this case.

Typical Cable System Hook Ups with Cable Converter/Descrambler Boxes

The cable hook-up shown at the bottom left allows VCR-TV functions except for viewing one channel while recording another.

75 ohm Cables System

 

2-WAY

OUT1

 

IN Cable TV

IN

SPLITTER

 

 

 

 

 

Converter Box

 

 

 

 

 

 

OUT2

 

 

 

 

 

OUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IN

Cable TV

 

 

Converter Box

 

 

 

 

Switch Box°

OUT

75 ohm Coaxial

 

 

 

 

 

Cables

 

 

 

 

 

°Not available from

 

 

 

 

 

 

 

 

 

our company.

 

 

 

 

 

 

 

 

 

Please contact your

 

 

 

 

 

 

 

 

cable company.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To the 75 ohm VHF

Input on the TV set

The above cable hook-up allows VCR functions, including viewing one channel while recording another, but it requires two cable TV Converter/Descrambler Boxes, one Switch Box and one 2-Way Splitter.

Since the VCR has an extended range of tuning, tuning-programing of non-scrambled Mid-Band and Super-Band TV programs is possible. When a cable converter or descrambler box is connected to the VCR, all timer-controlled recording functions will continue to operate with the exception of charging channels automatically. CATV Channel selection will have to be performed

75 ohm Cable System

Cable TV

with the cable converter. Timer-controlled

Converter

IN Box

75 ohm Coaxial OUT Cables

To the 75 ohm VHF

Input on the TV set

recording from CATV Channels is therefore limited to one channel at any given time.

10

Image 10
Contents NV-FJ630PMP NV-SJ430PMP Longrun Head System CVC Crystal View Control IndicatorPlug in Auto Tuning NV-SJ430PMPContents 15 16 19 20 Controls and Connection SocketsNV-FJ630PMP 22 23Before Use DATE, CH, ON, OFF PROG./CHECK Cancel Speed Timer Á Infra-red Remote ControllerMenu OK Installing the Batteries Power ÍConnections Basic ConnectionsSetting Up Cable Connection Plug in Auto Tuning Tuning the TV to your VCRTuning Display Symbol To Cancel Auto Tuning Mid- OperationTo Restart Plug in Auto Tuning To Change the RF Output ChannelPreparations Storing TV Broadcasts in your VCRSelect Antenna System by pressing 3 or 4 and then press OK Manual System Setting Procedure Channel PlanPreparation Setting the Remote Controller for Operation of your TVOperations Time Reset Function Setting the Clock of your VCRPress Menu To Use the On Screen Display Settings Using the On Screen DisplayOn Screen Display For the Blue Background Function For the Jet Navigator Function To Select the Jet Search Speed in the EP modeTo Set to the Conditions for Direct Recording Function Auto Bilingual Choice Function NV-FJ630PMP only To Select the Desired LanguageAudio Channel Selection NV-FJ630PMP only MainPlayback PlayFast-forwarding or Rewinding the Tape To Stop Playback Automatically Playback Off Timer FunctionOther Playback Functions To Obtain a Higher Speed Rewind Jet RewindMode Characteristic Example for To Playback in the Desired Picture Quality Picture ModeTo Eject the Video Cassette Using the Remote Controller To Play back the Recorded Part RepeatedlyManual Recording Operations Display SymbolsPower Í/I Power Í to turn the VCR on ButtonsTo View One TV Program while Recording Another One To Select the Desired Tape SpeedTo Interrupt Recording To Display the Approximate Remaining Tape TimeOne-Touch Recording OTR When viewing or displaying the program from your TVWhen viewing or displaying the program from your VCR Direct RecordingExample Key ProgrammingOperations Press PROG./ Check Selecting the Desired Tape Speed Timer Recording from an External Signal SourceSetting other Programs in Succession Example for T120 tapeChecking a Timer Program Cancelling a Timer ProgramSearch Functions To cancel the Jet Navigator list Press MenuJet Navigator To Set the Category IconTo Check the Recorded Programming Data Time Stamp Function When Recording Over the Same Location on a TapeTo Demonstrate the Jet Navigator Function Recording Index Signals To stop the operation at any timeRecording VCR Assembly EditingEditing PAUSE/SLOW againOther Functions Other Automatic FunctionsIndication H∑∑, F∑∑ Before Requesting ServiceMessage of On Screen Display VCR will not operate correctlyPlayback will not operate correctly Remote controller will not operate CorrectlyRecording will not operate correctly Avoid Sudden Changes in Temperature Usage PrecautionsHumidity and Dust Normal Dirt on the video headsPicture Video SpecificationsNV-FJ630PMP NV-SJ430PMP AudioEnglish

NV-SJ430PMP, NV-FJ630PMP specifications

The Panasonic NV-FJ630PMP and NV-SJ430PMP are two notable models from Panasonic's lineup of VCRs, both of which showcase the brand's commitment to high-quality video playback and recording capabilities. With a variety of features designed to enhance user experience, these models have been popular choices for both casual users and videophiles alike.

The NV-FJ630PMP is a versatile VCR that supports both SP and LP recording modes. This model is equipped with advanced video heads that ensure high-quality playback and recording, reducing tape noise and enhancing overall visual clarity. One of its standout features is the Time Base Corrector which stabilizes the video signal for smoother playback, minimizing the jitter effect often associated with older tape formats.

For convenience, the NV-FJ630PMP also includes an index search function, allowing users to quickly navigate to specific segments of a tape. This is particularly useful for those archiving home videos or accessing favorite TV shows. Additionally, the model supports a variety of playback formats, ensuring compatibility with most VHS tapes.

On the other hand, the NV-SJ430PMP is a more compact model that doesn't sacrifice performance for size. It features an easy-to-use interface and offers similar recording capabilities as its counterpart. The built-in digital noise reduction technology helps to improve the quality of both audio and visual components, providing a cleaner, more enjoyable viewing experience.

Another notable characteristic is their flexibility in connectivity options. Both models come with standard AV outputs, allowing users to connect to a wide range of TVs and audio systems. The NV-FJ630PMP even offers S-Video output for users looking for enhanced image quality during playback, making it a suitable option for those who want to connect to high-end video equipment.

In conclusion, both the Panasonic NV-FJ630PMP and NV-SJ430PMP embody the reliability and quality that Panasonic is known for. With features aimed at enhancing user convenience and providing superior video performance, these VCRs remain relevant for users looking to enjoy their extensive tape collections or archive new recordings. Whether you are a nostalgia-driven enthusiast or looking for practical recording solutions, these models capture the essence of VHS technology with modern enhancements.