Panasonic NV-SJ430PMP, NV-FJ630PMP Recording Index Signals, To stop the operation at any time

Page 33
Display Symbol

To Find the Beginning of

Each Recording

(VHS Index Search System)

Example:

Searching for the 2nd recorded segment in the forward direction.

Press INDEX 9 twice. (This operation is performed

while the VCR is in the stop mode or normal playback

mode.)

≥After finding the specific recorded segment, playback starts automatically.

≥If you press INDEX 9 too many times,

simply press INDEX : to correct it. In this way, you can reduce the displayed figure down to 1.

≥Up to 20 index signals can be searched for in both directions.

≥The figure on the display decreases by 1 each time an index signal is located.

Recording Index Signals

Index signals are recorded in the following cases.

≥When a recording is started by pressing REC ¥ (¥ REC/OTR).

≥When REC ¥ on the remote controller is pressed during recording.

≥When timer recording is activated.

Note:

≥The index search function can only work correctly if the index signals are spaced at least 3 minutes apart in the SP mode and 5 minutes apart in the EP mode.

NAVI

INDEX

 

SEARCH

PICTURE MODE

REC

MENU

 

JET REW

OK

VCR

TV

1 2 3 4

+ + +

DATE

CH

ON

OFF

–

 

–

–

PROG. / CHECK

CANCEL

SPEED

TIMER

 

 

 

Á

AUDIO

RESET

OSD/DISPLAY VCR/TV

Searching while checking the video cassette contents (Intro-Jet Scan)

The approximate beginnings of each recorded program are played in succession at the high speed so that the program to be viewed can be located easily.

Preparations

≥Confirm that the TV is on and the VCR viewing channel is selected.

≥Press VCR/TV to select the VCR mode. ≥Load the pre-recorded video cassette.

Operations

1Press SEARCH.

(This operation is performed while the VCR

is off or while the VCR is in the stop mode or normal playback mode with the VCR on.) ≥The tape is rewound to

the beginning, and

INTRO-JET SCAN

55

played for about

 

 

 

 

10 seconds at the high

 

 

 

 

speed. It is then fast

 

 

 

 

forwarded, the VISS

 

 

 

 

(VHS Index Search

INTRO-JET SCAN

5

System) signals are

 

 

 

 

searched in

 

 

 

 

succession, and each

 

 

 

 

time the signals are

 

 

 

 

found, the tape is

 

 

 

 

 

 

 

 

played for about

 

 

 

 

 

 

 

 

10 seconds at the high

 

 

 

 

speed.

INTRO-JET SCAN

55

2When the program to be viewed is reached, press 1 (PLAY).

≥Normal playback now commences.

To stop the operation at any time:

Press ∫ (STOP).

Note:

≥This function may not work properly when recorded programs run for 15 minutes or less.

Advanced operations

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents NV-FJ630PMP NV-SJ430PMP Plug in Auto Tuning CVC Crystal View Control IndicatorLongrun Head System NV-SJ430PMPContents NV-FJ630PMP Controls and Connection Sockets15 16 19 20 22 23Before Use Infra-red Remote Controller DATE, CH, ON, OFF PROG./CHECK Cancel Speed Timer ÁMenu OK Power Í Installing the BatteriesBasic Connections ConnectionsSetting Up Cable Connection Tuning the TV to your VCR Plug in Auto TuningTuning To Restart Plug in Auto Tuning To Cancel Auto Tuning Mid- OperationDisplay Symbol To Change the RF Output ChannelStoring TV Broadcasts in your VCR PreparationsSelect Antenna System by pressing 3 or 4 and then press OK Channel Plan Manual System Setting ProcedureSetting the Remote Controller for Operation of your TV PreparationOperations Setting the Clock of your VCR Time Reset FunctionPress Menu Settings Using the On Screen Display To Use the On Screen DisplayOn Screen Display For the Blue Background Function To Select the Jet Search Speed in the EP mode For the Jet Navigator FunctionTo Set to the Conditions for Direct Recording Function Audio Channel Selection NV-FJ630PMP only To Select the Desired LanguageAuto Bilingual Choice Function NV-FJ630PMP only MainPlay PlaybackOther Playback Functions To Stop Playback Automatically Playback Off Timer FunctionFast-forwarding or Rewinding the Tape To Obtain a Higher Speed Rewind Jet RewindTo Eject the Video Cassette Using the Remote Controller To Playback in the Desired Picture Quality Picture ModeMode Characteristic Example for To Play back the Recorded Part RepeatedlyPower Í/I Power Í to turn the VCR on Operations Display SymbolsManual Recording ButtonsTo Interrupt Recording To Select the Desired Tape SpeedTo View One TV Program while Recording Another One To Display the Approximate Remaining Tape TimeWhen viewing or displaying the program from your VCR When viewing or displaying the program from your TVOne-Touch Recording OTR Direct RecordingKey Programming ExampleOperations Press PROG./ Check Setting other Programs in Succession Timer Recording from an External Signal SourceSelecting the Desired Tape Speed Example for T120 tapeCancelling a Timer Program Checking a Timer ProgramTo cancel the Jet Navigator list Press Menu Search FunctionsJet Navigator Icon To Set the CategoryWhen Recording Over the Same Location on a Tape To Check the Recorded Programming Data Time Stamp FunctionTo Demonstrate the Jet Navigator Function To stop the operation at any time Recording Index SignalsEditing Assembly EditingRecording VCR PAUSE/SLOW againOther Automatic Functions Other FunctionsMessage of On Screen Display Before Requesting ServiceIndication H∑∑, F∑∑ VCR will not operate correctlyRemote controller will not operate Correctly Playback will not operate correctlyRecording will not operate correctly Usage Precautions Avoid Sudden Changes in TemperatureHumidity and Dust Dirt on the video heads NormalPicture NV-FJ630PMP NV-SJ430PMP SpecificationsVideo AudioEnglish

NV-SJ430PMP, NV-FJ630PMP specifications

The Panasonic NV-FJ630PMP and NV-SJ430PMP are two notable models from Panasonic's lineup of VCRs, both of which showcase the brand's commitment to high-quality video playback and recording capabilities. With a variety of features designed to enhance user experience, these models have been popular choices for both casual users and videophiles alike.

The NV-FJ630PMP is a versatile VCR that supports both SP and LP recording modes. This model is equipped with advanced video heads that ensure high-quality playback and recording, reducing tape noise and enhancing overall visual clarity. One of its standout features is the Time Base Corrector which stabilizes the video signal for smoother playback, minimizing the jitter effect often associated with older tape formats.

For convenience, the NV-FJ630PMP also includes an index search function, allowing users to quickly navigate to specific segments of a tape. This is particularly useful for those archiving home videos or accessing favorite TV shows. Additionally, the model supports a variety of playback formats, ensuring compatibility with most VHS tapes.

On the other hand, the NV-SJ430PMP is a more compact model that doesn't sacrifice performance for size. It features an easy-to-use interface and offers similar recording capabilities as its counterpart. The built-in digital noise reduction technology helps to improve the quality of both audio and visual components, providing a cleaner, more enjoyable viewing experience.

Another notable characteristic is their flexibility in connectivity options. Both models come with standard AV outputs, allowing users to connect to a wide range of TVs and audio systems. The NV-FJ630PMP even offers S-Video output for users looking for enhanced image quality during playback, making it a suitable option for those who want to connect to high-end video equipment.

In conclusion, both the Panasonic NV-FJ630PMP and NV-SJ430PMP embody the reliability and quality that Panasonic is known for. With features aimed at enhancing user convenience and providing superior video performance, these VCRs remain relevant for users looking to enjoy their extensive tape collections or archive new recordings. Whether you are a nostalgia-driven enthusiast or looking for practical recording solutions, these models capture the essence of VHS technology with modern enhancements.
Top Page Image Contents