Panasonic NV-SJ430PMP Playback will not operate correctly, Recording will not operate correctly

Page 37

Playback will not operate correctly

The symptom description is indicated in quatations “ ”.

“The picture is noisy or is not in color. Horizontal bars or lines run down the screen.”

‘Tracking is not correct.

Adjust the tracking. See page 35.

‘The TV has not been tuned to the VCR. Tune the TV to the VCR. See page 11.

‘The video heads are clogged or worn. Consult your dealer for further advice.

Recording will not operate correctly

The symptom description is indicated in quatations “ ”.

“The 1 indication flashes whenever recording is attempted.”

‘The erasure prevention tab on the video cassette has been broken off.

Use a tape with an intact erasure prevention tab, or cover the tab hole with adhesive tape, if the original recording is no longer required.

“The picture is recorded with noise or a blank screen.”

‘The antenna or antenna cable is defective.

Check the antenna connection to the VCR. See pages 8–9.

Check your normal TV picture. If there is no picture, check your antenna.

‘The VCR is not correctly tuned. Retune the VCR. See pages 11–14.

‘A1 or A2 has been selected. Select the required TV program.

“Timer recording cannot be performed.”

‘The clock or calendar has been incorrectly set.

Check the clock and calendar. Set them to the present time. (Note that this is a 24-hour clock.) See page 16.

‘The recording starting or ending time setting is incorrect.

Set the recording starting and ending time correctly.

‘The VCR has not been set for timer recording.

Press TIMER Á (TIMER REC Á) after programming for timer recording.

“AV external recordings cannot be made.”

‘A1 or A2 has not been selected. Select A1 or A2 by pressing INPUT SELECT.

‘External AV connections are incorrect. Check that the connections for external video and audio sources are correct.

See page 34.

‘A1 cannot be selected. DIRECT REC can be set to ON.

Set DIRECT REC to OFF. See page 19.

The remote controller will not operate

correctly

The symptom description is indicated in quatations “ ”.

“The remote controller does not operate correctly.”

‘The remote controller transmitter beam is not reaching the VCR.

Ensure that the remote controller is being pointed at the VCR and that the transmitter beam is not obstructed.

‘The distance is too far.

Use the remote controller within 7 m of the VCR.

If this range is not possible, replace the batterries.

‘The batteries are exhausted. Replace the batteries. Note the precautions for replacement on page 7.

‘The batteries are incorrectly fitted with (+/-) reversed.

Fit the batteries correctly as shown on page 7.

Helpful Hints

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents NV-FJ630PMP NV-SJ430PMP Plug in Auto Tuning CVC Crystal View Control IndicatorLongrun Head System NV-SJ430PMPContents NV-FJ630PMP Controls and Connection Sockets15 16 19 20 22 23Before Use DATE, CH, ON, OFF PROG./CHECK Cancel Speed Timer Á Infra-red Remote ControllerMenu OK Power Í Installing the BatteriesBasic Connections ConnectionsSetting Up Cable Connection Plug in Auto Tuning Tuning the TV to your VCRTuning To Restart Plug in Auto Tuning To Cancel Auto Tuning Mid- OperationDisplay Symbol To Change the RF Output ChannelPreparations Storing TV Broadcasts in your VCRSelect Antenna System by pressing 3 or 4 and then press OK Channel Plan Manual System Setting ProcedurePreparation Setting the Remote Controller for Operation of your TVOperations Time Reset Function Setting the Clock of your VCRPress Menu To Use the On Screen Display Settings Using the On Screen DisplayOn Screen Display For the Blue Background Function For the Jet Navigator Function To Select the Jet Search Speed in the EP modeTo Set to the Conditions for Direct Recording Function Audio Channel Selection NV-FJ630PMP only To Select the Desired LanguageAuto Bilingual Choice Function NV-FJ630PMP only MainPlay PlaybackOther Playback Functions To Stop Playback Automatically Playback Off Timer FunctionFast-forwarding or Rewinding the Tape To Obtain a Higher Speed Rewind Jet RewindTo Eject the Video Cassette Using the Remote Controller To Playback in the Desired Picture Quality Picture ModeMode Characteristic Example for To Play back the Recorded Part RepeatedlyPower Í/I Power Í to turn the VCR on Operations Display SymbolsManual Recording ButtonsTo Interrupt Recording To Select the Desired Tape SpeedTo View One TV Program while Recording Another One To Display the Approximate Remaining Tape TimeWhen viewing or displaying the program from your VCR When viewing or displaying the program from your TVOne-Touch Recording OTR Direct RecordingExample Key ProgrammingOperations Press PROG./ Check Setting other Programs in Succession Timer Recording from an External Signal SourceSelecting the Desired Tape Speed Example for T120 tapeCancelling a Timer Program Checking a Timer ProgramSearch Functions To cancel the Jet Navigator list Press MenuJet Navigator Icon To Set the CategoryTo Check the Recorded Programming Data Time Stamp Function When Recording Over the Same Location on a TapeTo Demonstrate the Jet Navigator Function To stop the operation at any time Recording Index SignalsEditing Assembly EditingRecording VCR PAUSE/SLOW againOther Automatic Functions Other FunctionsMessage of On Screen Display Before Requesting ServiceIndication H∑∑, F∑∑ VCR will not operate correctlyPlayback will not operate correctly Remote controller will not operate CorrectlyRecording will not operate correctly Avoid Sudden Changes in Temperature Usage PrecautionsHumidity and Dust Normal Dirt on the video headsPicture NV-FJ630PMP NV-SJ430PMP SpecificationsVideo AudioEnglish

NV-SJ430PMP, NV-FJ630PMP specifications

The Panasonic NV-FJ630PMP and NV-SJ430PMP are two notable models from Panasonic's lineup of VCRs, both of which showcase the brand's commitment to high-quality video playback and recording capabilities. With a variety of features designed to enhance user experience, these models have been popular choices for both casual users and videophiles alike.

The NV-FJ630PMP is a versatile VCR that supports both SP and LP recording modes. This model is equipped with advanced video heads that ensure high-quality playback and recording, reducing tape noise and enhancing overall visual clarity. One of its standout features is the Time Base Corrector which stabilizes the video signal for smoother playback, minimizing the jitter effect often associated with older tape formats.

For convenience, the NV-FJ630PMP also includes an index search function, allowing users to quickly navigate to specific segments of a tape. This is particularly useful for those archiving home videos or accessing favorite TV shows. Additionally, the model supports a variety of playback formats, ensuring compatibility with most VHS tapes.

On the other hand, the NV-SJ430PMP is a more compact model that doesn't sacrifice performance for size. It features an easy-to-use interface and offers similar recording capabilities as its counterpart. The built-in digital noise reduction technology helps to improve the quality of both audio and visual components, providing a cleaner, more enjoyable viewing experience.

Another notable characteristic is their flexibility in connectivity options. Both models come with standard AV outputs, allowing users to connect to a wide range of TVs and audio systems. The NV-FJ630PMP even offers S-Video output for users looking for enhanced image quality during playback, making it a suitable option for those who want to connect to high-end video equipment.

In conclusion, both the Panasonic NV-FJ630PMP and NV-SJ430PMP embody the reliability and quality that Panasonic is known for. With features aimed at enhancing user convenience and providing superior video performance, these VCRs remain relevant for users looking to enjoy their extensive tape collections or archive new recordings. Whether you are a nostalgia-driven enthusiast or looking for practical recording solutions, these models capture the essence of VHS technology with modern enhancements.
Top Page Image Contents