Panasonic AJ-D950 manual Executing automatic editing, Postroll, Retry function, Auto tag editing

Page 38

Automatic editing

Executing automatic editing

Press the AUTO EDIT button. Automatic editing is now performed.

To stop the editing at any time, press the STOP button.

When the edit OUT point is reached, the unit goes into the stop mode after postrolling.

Postroll

With assemble editing, editing continues for approx. 2 seconds even after the edit OUT point has been passed, the tape is rewound to the OUT point, and the unit goes into the stop mode.

With insert editing, the unit goes into the play mode after the edit OUT point has been passed, the tape is rewound to the OUT point, and the unit goes into the stop mode.

Retry function

If the AUTO EDIT button is pressed again after the STOP button has been pressed to stop the editing, editing will start again from the beginning.

Auto tag editing

If the AUTO EDIT button is pressed when the next edit point has not yet been entered upon completion of editing, the previous edit OUT point will be entered as the IN point, and editing is performed accordingly.

To release the auto tag mode, press one of the tape transport buttons (PLAY, etc.).

<Note>

The entered points are automatically cleared after editing is executed. However, the previous editing points can be recalled by pressing the TRIM+ (or TRIM–) and SET buttons together.

1

- 3 8 -

Image 38
Contents Operating Instructions FCC Note Contents General and Features FeaturesChannel high-sound-quality digital audio Menu-driven setupMultifunctional interface Front panel Front Panel Top Section Power switch TV system/format displaysControls and their functions 525/525P*/625Audio Input Select switchesVideo Input Select displayFront Panel Center Section INT/EXT switch TC/CTL switchTC/UB switch TAPE/EE switch In the stop modeRemote lamp REMOTE/LOCAL switchSHTL/SLOW switch Search buttonPREVIEW/REVIEW buttons Preroll buttonAuto Edit button A IN/SET/OUT a OUT buttonsCassette insertion display lamp Headphones jackTime code buttons Dvcpro format 25Mbps cassette playback display lampMeter FULL/FINE selector switch Volume controlMonitor Select switches Front Panel Bottom Section Menu button REC Inhibit switchTV System selector switch SET buttonConnector area Time Code in connector AC in connectorSignal GND terminal Time Code OUT connectorDigital Audio IN/OUT connector Analog Component Video OUT connectorAnalog Composite Video OUT connectors Serial Digital Component AUDIO/VIDEO IN/OUT connectorConnections when one unit is used Set the Control switch on the front panel to LocalConnections when 2 units are used deck to deck Connections with editing controller Recorder OUT Monitor OUT RecorderVideo OUT REF BB WFM VSCTapes Cassette DescriptionSwitching on the power/inserting the cassette STOP/STAND by mode Still Timer Setting3Adjusting the audio level 1Selecting video/audio input signalsAdjusting the video level RecordingPlayback Jog/shuttle Jog modeShuttle mode Manual editing Preroll Automatic editing Deck to Deck When the unit is used as the player Switch settings and adjustmentsWhen the unit is used as the recorder Automatic editingSelect the editing mode Negative duration function Entering the edit pointsMatch frame processing function Checking the edit points Calculating the durationModifying the edit points 1Resetting both the edit in and OUT points2Resetting either the edit in or OUT point Preview Retry function Executing automatic editingPostroll Auto tag editingReview Split editing Deleting the edit points Audio split editingEntering the edit points Modifying the edit pointsDuration display Displaying the audio split edit pointsCueing up the tape to the edit points OperationsVideo level Video output encoder output signal adjustmentsSetup level Chroma level and hueSETUP-MENU Init SET YESPLAY/NOSTOP Changing the settingsSetup default settings Setup setting menus Changing the fileNo. Superimposed SettingI D E O Phase SCH Coarse SCH Fine AV Phase SYS H Range Encoder SELUser menu Setup menus Basic SettingDelay REF Alarm Auto EE SELEE Mode SearchCAP Lock OperationMemory stop function Memory9 Return ACK 5 Baud Rate Data LengthParity OtherIN/OUT VARRange DELEdit Setting User menuDisplay Time Code Vsync SetupINT SG LOW RFVideo ANA CUE OUT Monil Monir Moni OUT EmphasisUnity DigiAudio Setting AJ-PD950 User menu Setting DescriptionT u p m e n u s AudioUser bit Time code/user bitTime code Recording internal/external time codes Setting the internal time codeSetting the external time code TC switch EXT Reproducing the time code/user bit Superimpose screen Operation modeVTR operation mode Characters displayedServo reference On the setup menu Video in signal REF in signal No position Servo reference setting tablesInput signal status Video in signal REF in signal Servo reference No positionAudio V Fade Function Monitor output channel Audio recording channel and monitor output selectionAudio recording channel Circuit Full name Function Factory settingPrinted circuit board Rack mounting EIA standard rackVideo head cleaning CondensationDisplaying the Diag menu Error messagesDiag menu Display Description Displaying the Hours Meter informationItem No Description Monitor display DescriptionDescription VTR operation Table of Auto OFF Error messagesCounter display Monitor display Counter display Monitor display Description VTR operation Stop Power OFF onPower OFF O P Stop Pin No Hardware specificationsIntroduction Protocol Communication parameters Software specificationsOutline of send procedure from controller Communication parameterSTX OPL ETX ACK STX OPL ETX Error code tableACK Command table STX OBF ETX RS-232C interfaceStandby OFF Standby on STX OBN ETXRequest Commands relating to inquiries NotesCTL/TC Data Request Status Request STX QCD ETX STX QOP ETX STX QID ETXMicrosoft QuickBASIC sample program CLSSignal Connector signalsPin No. Signal Transmit CommonRS-232C Remote 25-pin D-SUB crossover cable supported Pin No SignalSignal Pin No Abbreviation Circuit DescriptionYES SpecificationsDvcpro 50/DVCPRO P Dvcpro DVCPRO/DVCPRO P* 1/5Audio Parts Information & Ordering
Related manuals
Manual 83 pages 53.64 Kb

AJ-PD950, AJ-D950 specifications

The Panasonic AJ-D950 and AJ-PD950 are professional digital video recorders that have earned a reputable position in the broadcast and production industries. These versatile devices combine advanced digital technology with user-friendly features, making them suitable for a wide range of applications, from live event coverage to high-end video production.

One of the notable features of the AJ-D950 is its ability to record in both DV and DVCPRO formats. This flexibility allows users to choose the best format for their specific needs, whether they require a higher-quality broadcast standard or a more compressed format for storage efficiency. The device supports both standard definition and high definition, providing broadcasters with the versatility to adapt to changing production demands.

The AJ-PD950 complements its predecessor with additional features tailored for enhanced usability and performance. Equipped with a powerful 25 Mbps data rate in DVCPRO mode, it ensures high-quality video output while maintaining manageable file sizes. The unit's dual-speed playback capabilities allow for real-time viewing and slow-motion playback, enabling editors to capture precise moments during post-production.

Both models feature an intuitive interface with a well-organized control layout, allowing for easy navigation through menus and settings. The LCD display offers clear visibility of vital operational information, including recording time, tape status, and battery life. Additionally, the presence of built-in speakers ensures that audio channels can be monitored without the need for external equipment.

Connectivity options are plentiful with the AJ-D950 and AJ-PD950, as they come equipped with various inputs and outputs, including SDI, HDMI, and analog connections. This wide range of interfaces facilitates integration with other production equipment, enhancing workflow and efficiency in the studio or on location.

The compact and rugged design of both models makes them ideal for field use. Their lightweight build allows for easy transport, while the robust housing provides protection against the rigors of on-location shoots. The long battery life further ensures that these recorders can operate for extended periods, accommodating even the most demanding production schedules.

In conclusion, the Panasonic AJ-D950 and AJ-PD950 are sophisticated yet user-friendly digital video recorders that offer exceptional performance and flexibility. Their advanced recording capabilities, ease of use, and extensive connectivity options make them valuable tools for professionals in the ever-evolving world of video production. Whether for broadcast, event coverage, or creative projects, these recorders stand out as reliable choices in the market.