Panasonic AJ-D950, AJ-PD950 Servo reference setting tables, During playback or special playback

Page 66

Servo reference setting tables

The servo reference signal is switched as shown in the tables below depending on the servo reference setting, deck mode and what input signal is available. When the mode is transferred to editing or recording/playback, the image may be disturbed and the transfer may be delayed if the references during playback and recording do not match.

During playback or special playback

 

SERVO REF

Input signal status

on the setup menu

VIDEO IN signal

REF IN signal

No. 304 position

AUTO

EXIT

During recording or editing

Reference signal (servo reference)

REF IN signal Internal sync signal

REF IN signal Internal sync signal REF IN signal Internal sync signal

REF IN signal Internal sync signal

SERVO REF

Input signal status

Reference signal

on the setup menu

 

 

VIDEO IN signal

REF IN signal

(servo reference)

No. 304 position

 

VIDEO IN signal

VIDEO IN signal

AUTO

REF IN signal

Internal sync signal

REF IN signal

Internal sync signal

EXIT

REF IN signal

Internal sync signal

" " denotes that the signal is supplied: " " denotes that the signal is not supplied.

When “BB” or “CB” is set for the setup menu No. 600 and internal signal generation has been selected, the REF IN signal serves as the servo reference when the REF IN signal is provided and the internal sync signal serves as the servo reference when the REF IN signal is not provided.

- 6 6 -

Page 65 Page 67
Image 66
Page 65 Page 67
Contents Operating Instructions FCC Note Contents General and Features FeaturesMenu-driven setup Multifunctional interfaceChannel high-sound-quality digital audio Front panel Front Panel Top Section Power switch TV system/format displaysControls and their functions 525/525P*/625Audio Input Select switchesVideo Input Select displayFront Panel Center Section INT/EXT switch TC/CTL switchTC/UB switch TAPE/EE switch In the stop modeRemote lamp REMOTE/LOCAL switchSHTL/SLOW switch Search buttonPREVIEW/REVIEW buttons Preroll buttonAuto Edit button A IN/SET/OUT a OUT buttonsCassette insertion display lamp Headphones jackTime code buttons Dvcpro format 25Mbps cassette playback display lampVolume control Monitor Select switchesMeter FULL/FINE selector switch Front Panel Bottom Section Menu button REC Inhibit switchTV System selector switch SET buttonConnector area Time Code in connector AC in connectorSignal GND terminal Time Code OUT connectorDigital Audio IN/OUT connector Analog Component Video OUT connectorAnalog Composite Video OUT connectors Serial Digital Component AUDIO/VIDEO IN/OUT connectorConnections when one unit is used Set the Control switch on the front panel to LocalConnections when 2 units are used deck to deck Connections with editing controller Recorder OUT Monitor OUT RecorderVideo OUT REF BB WFM VSCTapes Cassette DescriptionSwitching on the power/inserting the cassette STOP/STAND by mode Still Timer Setting3Adjusting the audio level 1Selecting video/audio input signalsAdjusting the video level RecordingPlayback Jog mode Shuttle modeJog/shuttle Manual editing Preroll Automatic editing Deck to Deck When the unit is used as the player Switch settings and adjustmentsWhen the unit is used as the recorder Automatic editingSelect the editing mode Entering the edit points Match frame processing functionNegative duration function Checking the edit points Calculating the duration1Resetting both the edit in and OUT points 2Resetting either the edit in or OUT pointModifying the edit points Preview Retry function Executing automatic editingPostroll Auto tag editingReview Split editing Deleting the edit points Audio split editingEntering the edit points Modifying the edit pointsDuration display Displaying the audio split edit pointsCueing up the tape to the edit points OperationsVideo level Video output encoder output signal adjustmentsSetup level Chroma level and hueChanging the settings Setup default settingsSETUP-MENU Init SET YESPLAY/NOSTOP Setup setting menus Changing the fileNo. Superimposed SettingI D E O Phase SCH Coarse SCH Fine AV Phase SYS H Range Encoder SELUser menu Setup menus Basic SettingDelay REF Alarm Auto EE SELEE Mode SearchCAP Lock OperationMemory stop function Memory9 Return ACK 5 Baud Rate Data LengthParity OtherIN/OUT VARRange DELEdit Setting User menuDisplay Time Code Vsync SetupINT SG LOW RFVideo ANA CUE OUT Monil Monir Moni OUT EmphasisUnity DigiAudio Setting AJ-PD950 User menu Setting DescriptionT u p m e n u s AudioTime code/user bit Time codeUser bit Setting the internal time code Setting the external time code TC switch EXTRecording internal/external time codes Reproducing the time code/user bit Superimpose screen Operation modeVTR operation mode Characters displayedServo reference On the setup menu Video in signal REF in signal No position Servo reference setting tablesInput signal status Video in signal REF in signal Servo reference No positionAudio V Fade Function Audio recording channel and monitor output selection Audio recording channelMonitor output channel Factory setting Printed circuit boardCircuit Full name Function Rack mounting EIA standard rackVideo head cleaning CondensationError messages Diag menuDisplaying the Diag menu Display Description Displaying the Hours Meter informationItem No Description Monitor display DescriptionTable of Auto OFF Error messages Counter display Monitor displayDescription VTR operation Stop Power OFF on Power OFF O P StopCounter display Monitor display Description VTR operation Hardware specifications IntroductionPin No Protocol Communication parameters Software specificationsOutline of send procedure from controller Communication parameterError code table ACKSTX OPL ETX ACK STX OPL ETX Command table STX OBF ETX RS-232C interfaceStandby OFF Standby on STX OBN ETXRequest Commands relating to inquiries NotesCTL/TC Data Request Status Request STX QCD ETX STX QOP ETX STX QID ETXMicrosoft QuickBASIC sample program CLSSignal Connector signalsPin No. Signal Transmit CommonRS-232C Remote 25-pin D-SUB crossover cable supported Pin No SignalSignal Pin No Abbreviation Circuit DescriptionYES SpecificationsDvcpro 50/DVCPRO P Dvcpro DVCPRO/DVCPRO P* 1/5Audio Parts Information & Ordering
Related manuals
Manual 83 pages 53.64 Kb

AJ-PD950, AJ-D950 specifications

The Panasonic AJ-D950 and AJ-PD950 are professional digital video recorders that have earned a reputable position in the broadcast and production industries. These versatile devices combine advanced digital technology with user-friendly features, making them suitable for a wide range of applications, from live event coverage to high-end video production.

One of the notable features of the AJ-D950 is its ability to record in both DV and DVCPRO formats. This flexibility allows users to choose the best format for their specific needs, whether they require a higher-quality broadcast standard or a more compressed format for storage efficiency. The device supports both standard definition and high definition, providing broadcasters with the versatility to adapt to changing production demands.

The AJ-PD950 complements its predecessor with additional features tailored for enhanced usability and performance. Equipped with a powerful 25 Mbps data rate in DVCPRO mode, it ensures high-quality video output while maintaining manageable file sizes. The unit's dual-speed playback capabilities allow for real-time viewing and slow-motion playback, enabling editors to capture precise moments during post-production.

Both models feature an intuitive interface with a well-organized control layout, allowing for easy navigation through menus and settings. The LCD display offers clear visibility of vital operational information, including recording time, tape status, and battery life. Additionally, the presence of built-in speakers ensures that audio channels can be monitored without the need for external equipment.

Connectivity options are plentiful with the AJ-D950 and AJ-PD950, as they come equipped with various inputs and outputs, including SDI, HDMI, and analog connections. This wide range of interfaces facilitates integration with other production equipment, enhancing workflow and efficiency in the studio or on location.

The compact and rugged design of both models makes them ideal for field use. Their lightweight build allows for easy transport, while the robust housing provides protection against the rigors of on-location shoots. The long battery life further ensures that these recorders can operate for extended periods, accommodating even the most demanding production schedules.

In conclusion, the Panasonic AJ-D950 and AJ-PD950 are sophisticated yet user-friendly digital video recorders that offer exceptional performance and flexibility. Their advanced recording capabilities, ease of use, and extensive connectivity options make them valuable tools for professionals in the ever-evolving world of video production. Whether for broadcast, event coverage, or creative projects, these recorders stand out as reliable choices in the market.
Top Page Image Contents