Panasonic AJ-PD950 manual Baud Rate Data Length, Parity, Return ACK, Other, Dvcpro, Non, Odd, Even

Page 51

USER menu

<INTERFACE>

Item

No. Superimposed display

2 0 0 PARA RUN

201 9P SEL

Setting

No.	Superimposed
	display
0000	DIS
0001	ENA

0000	OFF
0001	ON

Description

This selects whether two or more VTRs are to be operated in synchronization.

0:No operation in synchronization

1:Operation in synchronization

<Note>

When operating two or more VTRs in synchronization, set item 200 of all the VTRs to 0001.

This selects whether the 9P connector functions when the REMOTE/LOCAL switch has been set to REMOTE.

0:Do not function

1:Function

2 0 2 ID SEL

2 0 3 25P SEL

204RS232C SEL

20 5 BAUD RATE

2 0 6	DATA
	LENGTH
2 0 7	STOP BIT
2 0 8	PARITY

2 0 9 RETURN ACK

	0000	OTHER	This selects the ID information which is returned to the
	0001	DVCPRO	controller.
			0: 20 25H
			’
	0000	OFF	1: DVCPRO s, own ID is returned (F0 33H).
	0000	OFF	This selects whether the PARALLEL (25P) connector functions
	0001	ON when the REMOTE/LOCAL switch has been set to REMOTE.
			0: Does not function
	0000	OFF	1: Functions
	0000	OFF	These settings are for selecting whether the RS-232C
	0001	ON connector is to function when the REMOTE/LOCAL switch is
			set to REMOTE.
			0: Connector does not function.
	0000	300	1: Connector functions.
	0000	300	These settings are for selecting the RS-232C communication
	0001	600	speed (baud rate).
	0002	1200
	0003	2400
	0004	4800
	0005	9600
	0000	7	These settings are for selecting the RS-232C data length.
	0001	8	(Unit: bit)
	0000	1	These settings are for selecting the RS-232C stop bit length.
	0001	2	(Unit: bit)
	0000	NON	These settings are for selecting the none, odd or even for the
	0001	ODD	RS-232C parity bit.
	0002	EVEN	0: Parity bit is not used.
			1: An odd number of bits is used for the parity system.
	0000	OFF	2: An even number of bits is used for the parity system.
	0000	OFF	These settings are for selecting whether the ACK code is to be
	0001	ON
	0001	ON	returned when a command is received from RS-232C.

0: ACK code is not returned.

1: ACK code is returned.

The underline on the setting item denotes the initial setting.

- 5 1 -

Image 51

Contents Operating Instructions FCC Note Contents Features General and FeaturesMenu-driven setup Multifunctional interfaceChannel high-sound-quality digital audio 525/525P*/625 Power switch TV system/format displaysControls and their functions Front panel Front Panel Top SectionInput Select display Input Select switchesVideo AudioFront Panel Center Section TAPE/EE switch In the stop mode TC/CTL switchTC/UB switch INT/EXT switchSearch button REMOTE/LOCAL switchSHTL/SLOW switch Remote lampA IN/SET/OUT a OUT buttons Preroll buttonAuto Edit button PREVIEW/REVIEW buttonsDvcpro format 25Mbps cassette playback display lamp Headphones jackTime code buttons Cassette insertion display lampVolume control Monitor Select switchesMeter FULL/FINE selector switch Front Panel Bottom Section SET button REC Inhibit switchTV System selector switch Menu buttonConnector area Time Code OUT connector AC in connectorSignal GND terminal Time Code in connectorSerial Digital Component AUDIO/VIDEO IN/OUT connector Analog Component Video OUT connectorAnalog Composite Video OUT connectors Digital Audio IN/OUT connectorSet the Control switch on the front panel to Local Connections when one unit is usedConnections when 2 units are used deck to deck Connections with editing controller WFM VSC RecorderVideo OUT REF BB Recorder OUT Monitor OUTCassette Description TapesSwitching on the power/inserting the cassette Still Timer Setting STOP/STAND by modeRecording 1Selecting video/audio input signalsAdjusting the video level 3Adjusting the audio levelPlayback Jog mode Shuttle modeJog/shuttle Manual editing Preroll Automatic editing Deck to Deck Automatic editing Switch settings and adjustmentsWhen the unit is used as the recorder When the unit is used as the playerSelect the editing mode Entering the edit points Match frame processing functionNegative duration function Calculating the duration Checking the edit points1Resetting both the edit in and OUT points 2Resetting either the edit in or OUT pointModifying the edit points Preview Auto tag editing Executing automatic editingPostroll Retry functionReview Split editing Modifying the edit points Audio split editingEntering the edit points Deleting the edit pointsOperations Displaying the audio split edit pointsCueing up the tape to the edit points Duration displayChroma level and hue Video output encoder output signal adjustmentsSetup level Video levelChanging the settings Setup default settingsSETUP-MENU Init SET YESPLAY/NOSTOP Changing the file Setup setting menusEncoder SEL SettingI D E O Phase SCH Coarse SCH Fine AV Phase SYS H Range No. SuperimposedUser menu Basic Setting Setup menusSearch REF Alarm Auto EE SELEE Mode DelayMemory OperationMemory stop function CAP LockOther 5 Baud Rate Data LengthParity 9 Return ACKDEL VARRange IN/OUTUser menu Edit SettingDisplay Time Code LOW RF SetupINT SG VsyncVideo Digi CUE OUT Monil Monir Moni OUT EmphasisUnity ANAAudio Setting Audio Setting DescriptionT u p m e n u s AJ-PD950 User menuTime code/user bit Time codeUser bit Setting the internal time code Setting the external time code TC switch EXTRecording internal/external time codes Reproducing the time code/user bit Characters displayed Operation modeVTR operation mode Superimpose screenServo reference Video in signal REF in signal Servo reference No position Servo reference setting tablesInput signal status On the setup menu Video in signal REF in signal No positionAudio V Fade Function Audio recording channel and monitor output selection Audio recording channelMonitor output channel Factory setting Printed circuit boardCircuit Full name Function EIA standard rack Rack mountingCondensation Video head cleaningError messages Diag menuDisplaying the Diag menu Monitor display Description Displaying the Hours Meter informationItem No Description Display DescriptionTable of Auto OFF Error messages Counter display Monitor displayDescription VTR operation Stop Power OFF on Power OFF O P StopCounter display Monitor display Description VTR operation Hardware specifications IntroductionPin No Communication parameter Software specificationsOutline of send procedure from controller Protocol Communication parametersError code table ACKSTX OPL ETX ACK STX OPL ETX Command table STX OBN ETX RS-232C interfaceStandby OFF Standby on STX OBF ETXSTX QCD ETX STX QOP ETX STX QID ETX Commands relating to inquiries NotesCTL/TC Data Request Status Request RequestCLS Microsoft QuickBASIC sample programTransmit Common Connector signalsPin No. Signal SignalAbbreviation Circuit Description Pin No SignalSignal Pin No RS-232C Remote 25-pin D-SUB crossover cable supportedDvcpro DVCPRO/DVCPRO P* 1/5 SpecificationsDvcpro 50/DVCPRO P YESAudio Parts Information & Ordering

Related manuals

Manual 83 pages 53.64 Kb