Settings Using the On-Screen Display
OPTION
| AV | 0 |
| |
| INDEX/SKIP | SLOW/SEARCH | ||
| NAVI |
|
| MENU |
| TOP MENU |
|
| |
| DIRECT |
|
| PLAY |
| NAVIGATOR |
|
| LIST |
ENTER |
| ENTER |
| |
|
|
|
| |
DISPLAY |
|
|
|
|
| DISPLAY |
|
| RETURN |
| PROG/CHECK | TIMER | PROG PLAY | JET REW |
CANCEL/ | CANCEL/RESET | SUBTITLE | AUDIO | ANGLE/PAGE |
|
|
|
| |
RESET | MUSIC w/ PICTURE A.SRD | CINEMA POSITION MEMORY | ||
| ||||
|
| PICTURE | SPEED | INPUT SELECT |
| PLAY MODE | REPEAT | ZOOM | SETUP |
Press [34] to select the item and press [2 1] to change the setting.
e.g. NV-VP31GN
MENU |
|
| OPTION |
| 1/2 |
|
|
|
| OPTION |
| 2/2 | |||||||
|
|
|
|
|
|
|
|
| |||||||||||
| TAPE SELECT |
| [AUTO] |
| DUBBING NORMAL AUDIO | [L] | |||||||||||||
| NTSC INPUT SELECT | [AUTO] |
| MONAURAL |
| [OFF] | |||||||||||||
| NTSC PB SELECT |
| [onPALTV] |
|
|
|
|
|
|
|
|
|
|
|
| ||||
| JET NAVIGATOR |
| [OFF] |
|
|
|
|
|
|
|
|
|
|
|
| ||||
| DELETE NAVIDATA |
| [NO] |
|
|
|
|
|
|
|
|
|
|
|
| ||||
| OSD REC |
| [OFF] |
|
|
|
|
|
|
|
|
|
|
|
| ||||
| OSD |
| [AUTO] |
|
|
|
|
|
|
|
|
|
|
|
| ||||
| OUT[VHS/DVD] |
| [AUTO] |
|
|
|
|
|
|
|
|
|
|
|
| ||||
| SELECT: |
|
|
|
| END :MENU |
| SELECT: |
|
|
|
|
|
|
|
| END :MENU | ||
|
|
|
|
|
|
| |||||||||||||
|
|
|
|
| |||||||||||||||
AUDIO
¬To exit the settings screen Press [MENU] twice.
Items | Settings (Underlined items are the initial setting.) | |
|
|
|
TAPE SELECT | AUTO: | E30, E60, E90, E120, E180 and E240 tapes |
Set the length of tape you are using so the unit can show the correct | E195: | E195 tapes |
remaining time (lpage 25). | E260: | E260 tapes |
| E300: | E300 tapes |
|
|
|
NTSC INPUT SELECT | AUTO: | NTSC [4.43] and [3.58] signals |
Select the colour TV system used to record NTSC signals. | ≥If the tape has not recorded correctly, select 4.43 or 3.58. | |
| 4.43: | NTSC 4.43 signals |
| 3.58: | NTSC 3.58 signals |
| ≥Some programmes on NTSC 3.58 system cannot be recorded | |
| correctly at this position. | |
|
| |
NTSC PB SELECT | on PAL TV: TVs that can receive PAL signals | |
Select the colour TV system of the TV used to play back a tape | 4.43: | TVs that can receive NTSC 4.43 signals |
recording NTSC signals. | 3.58: | TVs that can receive NTSC 3.58 signals |
|
|
|
JET NAVIGATOR (lpage 20) | ON: | Jet Navigator data automatically registered. |
| OFF: | Data not registered. |
| ≥If you select “ON”, “OSD REC” is set to “OFF” automatically. | |
|
|
|
DELETE NAVIDATA | NO |
|
See page 20 to delete data on a single tape. | ENTER: | If you choose this position, press [ENTER] to delete |
|
| all the Jet Navigator data. |
|
|
|
OSD REC | ON |
|
You can record the present date and time on the same screen | OFF |
|
which the picture is recorded. | ≥If you select “ON”, “JET NAVIGATOR” is set to “OFF” | |
| automatically. | |
|
|
|
OSD (lpage 25) | AUTO: | Messages appear on the TV for about 5 seconds |
|
| when you press [DISPLAY]. |
| OFF: | Messages do not appear. |
|
|
|
OUT [VHS/DVD] (lpage 12) | VHS: | Only VHS outputs. |
You can set the unit so that the output is automatically switched to | MANUAL: | VHS output and DVD output are manually switched. |
the device which starts playback. | AUTO: | VHS and DVD are automatically switched depending |
|
| on the manipulation or the unit operation. |
|
|
|
DUBBING NORMAL AUDIO (lpage 42) | L: | To record the sound from left channel |
Select the audio channel to be recorded on the Normal audio track | R: | To record the sound from right channel |
when dubbing a bilingual DVD. |
|
|
|
|
|
MONAURAL | ON: | To record the normal sound during a NICAM |
Select the sound mode. (For |
| broadcast or if the stereo sound is distorted due to |
|
| inferior reception conditions. |
| OFF |
|
|
|
|
24