Connections
When the unit is turned on after connecting the aerial cable and the mains lead, Plug in Auto Tuning starts automatically.
Basic Connections
The following connections are required to record the video cassette and play back the video cassette/discs through the TV.
≥Refer to the TV’s operating instructions.
≥Turn the TV off and disconnect its AC mains lead.
TV Set (Not supplied) 
Aerial
(Not supplied)
To mains supply |
|
|
| Aerial Connector | ||
|
|
|
| |||
| COMPONENT VIDEO |
|
|
| IN | |
AC IN ~ | (NTSC 480P/480I PAL 576I) | VIDEO |
|
| ||
Y PB | PR |
|
| AV1 IN |
| |
DIGITAL AUDIO |
|
|
|
|
| |
(PCM/BITSTREAM) |
|
|
|
|
|
|
DVD OUT |
|
|
|
|
|
|
|
|
|
|
| VHS/DVD | OUT |
|
|
|
|
|
| |
OPTICAL | VIDEO S VIDEO | VIDEO | OUT | RF | ||
| ||||||
Audio/Video Output Sockets
≥Set the RF output channel of the unit to “ss” (RF OFF) (lpage 11).
≥Connect audio/video cables directly to your TV. The video signals on DVDs and video tapes have copyright protection. The video may not be shown correctly if you connect through an A/V selector or other equipment.
| AUDIO VIDEO | |
| IN | IN |
| L | R |
Audio/video cable | Television | |
(Supplied)
| COMPONENT VIDEO | ||
AC IN ~ | (NTSC 480P/480I PAL 576I) | ||
Y | PB | PR | |
|
|
| |
DIGITAL AUDIO |
|
|
|
(PCM/BITSTREAM) |
|
|
|
DVD OUT |
|
|
|
OPTICAL | VIDEO | ||
S VIDEO
AV1 IN
VHS/DVD
OUT
For better video from DVD
Y PB PR
COMPONENT | Video cable (Not supplied) | |
VIDEO IN | ||
| ||
Television |
|
COMPONENT VIDEO terminal (progressive out)
These terminals can be used for either interlace or progressive output and provide a clearer picture than the S VIDEO terminal. Connection using these terminals outputs the colour difference signals (PB/PR) and luminance signal (Y) separately in order to achieve high fidelity in reproducing colours.
≥The description of the component video input terminals depends on the TV or monitor (e.g. Y/PB/PR,
¬To enjoy progressive video lpage 13
S video cable (Not supplied) S VIDEO IN
Television
S VIDEO terminal
The S VIDEO terminal achieves a more vivid picture than the VIDEO OUT terminal by separating the chrominance (C) and luminance
(Y)signals (Actual results depend on the TV). ≥Connect to a different terminal group (e.g.,
“VIDEO 2”) than that you used for the connection through this unit’s VHS/DVD OUT terminal. Picture from the VHS section will not appear when you use the same group input terminal connections because the S video terminal input takes precedence.
≥These connections are for the DVD section only.
Carry out the Basic Connections described above to view video from the VHS section.
≥When making this connection, ensure that you connect the audio cables (not supplied) to the corresponding audio input terminals on the TV.
≥You may need to change the
Audio cable
(Not supplied) Television
L R
VIDEO S VIDEO | AUDIO IN | |
|
|
8