Panasonic PV-V4022-A warranty Copying Your Tapes Dubbing, Connection

Page 11

Copying Your Tapes (Dubbing)

Connection

(Rear connection shown.)

VCR

(Mono)

IN FROM ANT.

VCR

 

 

 

 

(Mono)

OUT TO TV

R

L

AUDIO OUT

VIDEO OUT

AUDIO IN

VIDEO IN

Front of VCR

TV

VHF/UHF

VIDEO IN 2 AUDIO IN 2

(Front Audio/Video IN jacks are also provided)

1Connect VIDEO OUT jack on Playing VCR to VIDEO IN jack on Recording VCR. To monitor the dubbing, also connect a TV as shown.

2Connect AUDIO OUT jack on Playing VCR to AUDIO IN jack on Recording VCR.

In place of a Playing VCR, you can use other equipment, such as a Camcorder. Simply connect the unit’s Audio/Video outputs to the Recording VCR.

 

 

Playing (Source) VCR

Recording (Editing) VCR

1

Insert pre-recorded tape.

Insert blank tape with record tab.

 

 

 

 

 

 

 

2

 

 

 

 

Press INPUT* to set VCR Input mode to LINE1

 

 

 

 

 

 

 

 

 

 

for Video Input (Rear) or to LINE2 for Video

 

 

 

 

 

Input (Front). (See “Selecting the Input Mode”

 

 

 

 

 

below.)

 

 

 

 

 

 

 

3

Press PLAY, then PAUSE/SLOW

Press REC, then PAUSE/SLOW

 

immediately to enter PLAY/PAUSE mode. immediately to enter REC/PAUSE mode.

 

 

 

The operation of steps 4 and 5 must be done on both playing

 

 

 

 

and recording VCRs at the same time.

 

4

Press PLAY to start dubbing.

Press PAUSE/SLOW to start dubbing.

 

Playing VCR starts playback.

Recording VCR starts recording.

 

 

 

5

Press STOP to stop dubbing.

Press STOP to stop dubbing.

To Monitor Dubbing on Your TV

1Turn your TV on and tune to the Recording VCR channel (CH3 or CH4).

2Set the VCR/ TV Selector on the Recording VCR to “VCR.”

Note • Dubbing tapes protected with Copy Guard will have poor quality results.

Selecting the Input Mode

Method 1:

Press INPUT repeatedly.

Channel Number LINE1 LINE2

Method 2:

Press CH / .

Display will change as below.

123

(CABLE) (TV) LINE2LINE1125 or 69

“L1” or “L2” lights on Multi-Function Display (about 4 sec.) when LINE1 or LINE2 is selected.

LINE1: For rear audio/video connection.

LINE2: For front audio/video connection.

Panasonic Consumer Electronics Company,

Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094

Panasonic Sales Company (“PSC”),

Division of Matsushita Electric of Puerto Rico, Inc. Ave. 65 de Infantería. Km. 9.5 San Gabriel Industrial Park,

Carolina, Puerto Rico 00985

- 8 -

P

Printed in Indonesia LSQT0699A S0103-0

Caution : Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement.

*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again.

- 9 -

Image 11
Contents Basic Operations Limited WarrantyCustomer Services Directory Model No. PV-V4022-A Table of ContentsSafety Precautions Important Safeguards and PrecautionsBefore Using For DSS/Cable Box VCR TV Initial Setup Clock Set Select Channel Playback Record AutoButtons, Front View Timer RecordingTimer Location of ControlsPara Ant/Cable VCR TV Varios Model No. PV-V4022-A Clock, Time Zone Adjust, VCR’s Output Channel DSTBefore Requesting Service Advanced OperationsAdvanced Connections Multi-Brand Control Multi-Brand Control FeatureFeature Advanced ConnectionsFunction & Channel Displays Blank Tape/No Video Signal IndicationsOn-Screen Displays OSD Displays OSDTape Operation Playing Source VCR Recording Editing VCR Copying Your Tapes DubbingConnection Tapes Dubbing Special VCR FeaturesBefore Requesting Service VCR Features Copy Your