Panasonic NV-HV60 Storing TV Broadcasts in Your VCR, Auto Tuning Using the On Screen Display

Page 7

Storing TV Broadcasts in Your VCR

The VCR is fitted with its own tuner (just like a normal TV) and can be preset to receive up to 99 TV broadcast stations.

Pre-programmed TV Channels (NV-HV60GL/Australia)

The local TV broadcast channels 2, 7, 9, 10 and 28 are factory-preset in this VCR.

That is, if you can receive television broadcasts on VHF channels 2, 7, 9, 10 and UHF channel 28, these are already

Auto Tuning Using the On Screen Display

Introduction

The VCR is tuned automatically by Plug in Auto Tuning. However, Auto Tuning using the On Screen Display should be performed according to the following method if necessary.

Preparations

Confirm that the TV is on and the VCR viewing channel is selected.

Turn on the VCR and select any programme position except A1 or A2.

Set [VCR/TV] switch (22) to [VCR].

tuned on the programme positions with the matching numbers. However, it is possible to cancel these settings and tune the local TV broadcast channels to any desired programme position.

Plug in Auto Tuning

(NV-HV60GN/New Zealand)

When the VCR is turned on after connecting the aerial cable and the mains lead, Auto Tuning starts.

Operations

1Press [MENU] (7) to display the Main menu on the TV screen.

2Press [Cursor] (37) (34) to select [TUNER PRESET] then press [OK] (23).

MENU

CLOCK SET TUNER PRESET SYSTEM OPTION

SELECT : , OK

END :MENU

MENU

CLOCK SET TUNER PRESET SYSTEM OPTION

SELECT : , OK

END :MENU

AUTO TUNING

 

AUTO TUNING IS

IN PROGRESS,

 

COMPLETED.

PLEASE WAIT.

 

 

CH 22 SEARCH

21

END: MENU

END: MENU

During Plug in Auto Tuning

After Plug in Auto Tuning

Auto tuning searches for TV stations from VHF minimum to UHF maximum and memorizes every tuned programme position.

If you turn the VCR off during Auto Tuning, Auto Tuning will stop halfway.

If the VCR starts playback during Auto Tuning, Auto Tuning will stop halfway.

3Press [Cursor] (37) (34) to select [AUTO TUNE] then press [Cursor] (37) (21) to start the

Auto Tuning.

When Auto Tuning is completed, the On Screen Display disappears and programme position 1 is selected.

TUNER PRESET

 

CH 1

 

 

 

 

 

 

CLEAR

 

 

 

 

 

[OFF]

AUTO TUNE

 

SEARCH

 

 

 

 

 

[3]

FINE

 

 

 

 

 

 

SELECT:

 

 

 

 

END :MENU

 

 

 

 

AUTO TUNING

 

 

IN PROGRESS,

 

 

PLEASE WAIT.

 

CH 1

 

SEARCH

100

 

 

 

 

 

END: MENU

To Cancel Auto Tuning Mid-Operation:

Press [MENU] (7) during Auto Tuning. Auto Tuning is cancelled.

To Restart Plug in Auto Tuning:

1Press [EJECT] (40) and remove the video cassette.

2Keep both [Channel] (32) I and Jon the VCR pressed simultaneously for 3 seconds or more during the VCR on.

The channel displayed on the VCR display disappears for a moment then changes to 1.

Disappears 1

3Disconnect the mains lead and then reconnect it.

4Turn off the VCR and then turn it on.

• Auto Tuning commences.

If Auto Tuning stops halfway by turning the VCR off or a power failure:

1Disconnect the mains lead and then reconnect it.

2Turn off the VCR and then turn it on.

• Auto Tuning commences.

The number displayed here is the number of channels still to be auto tuned.

Channels that can be Received

 

VHF

UHF

CATV

 

 

 

 

NV-HV60GL

0-12

28-69

45-470MHz

 

 

 

 

NV-HV60GN

1-11

21-69

45-470MHz

 

 

 

 

Notes:

Auto Tuning searches for TV stations from VHF minimum to UHF maximum and memorizes every tuned programme position. Other programme positions are skipped.

Auto Tuning takes five or more minutes to complete its search.

If the VCR is not correctly tuned by Auto Tuning, follow the procedure on page 8.

7

Image 7
Contents Video Cassette Recorder ContentsInserting Remote Control Batteries For your safetyCondensation may form in the following cases 5453 Controls and ComponentsPROG/CHECK Picture ModeTimer Check Prog Guide Prog PlayConnections Setting the Remote Control to Operate Your TVBasic Connections To Change the RF output Channel Tuning the TV to Your VCRFor NV-HV60GL/Australia For NV-HV60GN/New ZealandPre-programmed TV Channels NV-HV60GL/Australia Auto Tuning Using the On Screen DisplayPlug in Auto Tuning NV-HV60GN/New Zealand Storing TV Broadcasts in Your VCRBlanking of Unused Programme Positions Manual Tuning ProcedureDirect Tuning Fine Tuning ProcedureTime Reset Function Setting the Clock of Your VCRTo Make Various Indicators Appear On Screen Display Settings Using the On Screen DisplayTo Set the Colour TV System Option Setting Ntsc Playback PlaybackTo Play back S-VHS Cassette Tape SQPB=S-VHS Quasi Playback To Play Back a Recorded Part RepeatedlyRecording Nicam Broadcast System NV-HV60GN only To reset the tape counterTo Display the Approximate Remaining Tape Time Recording of Stereo or Bilingual Programmes NV-HV60GL onlyMode Recording from an external sourceRecording VCR VCR in tape refresh standbyKey Programming Timer RecordingDaily Timer Recording To Suspend the Timer Recording Standby ModeSetting other Programmes in Succession Weekly Timer RecordingCancelling a Timer Programme Checking a Timer ProgrammePress PROG/CHECK 14 twice Icon indications Category setting allows you toTo Set the Category Recorded by the characterTo Check the Recorded Programming Data Time Stamp Function When Recording Over the Same Location on a TapeTo Cancel the Index Search or to Stop Playback Press Stop To Demonstrate the Jet Navigator FunctionMessage of On Screen Display Before Requesting ServiceTo Cancel the Easy Programme Playback Operation Press Prog PlayCrystal View Control Adjusting the Playback PictureDirt on the video heads Specifications