Panasonic PV-D4745S manual Press SET repeatedly, For mode. See below, Press A/V Optimizer

Page 55

*Important: If a remote control button does not work when pressed, press the DVD button on the remote and try the button again.

PROGRESSIVE OUT

Sets the Component Video Output Connector (p. 10, 13) to output the Progressive scan signal.

 

Press ACTION

 

1 to display DVD MAIN MENU.

 

2

 

 

Press

to select

 

 

 

 

 

 

“PROGRESSIVE OUT,”

 

 

 

and

 

 

 

 

 

 

 

 

press SET repeatedly

 

 

 

for mode. (See below.)

 

 

 

 

 

OFF: Progressive scan signal is not output.

ON: Progressive scan signal is output from the Component Video Output Connector.

3 Press ACTION

to exit this mode.

A/V OPTIMIZER

You can set to preset audio/video effects as desired.

Notes

•If the television is not progressive compatible, a progressive scan picture is not available. Connect the Video Output or S-Video Output connector (see p. 12, 13) and set PROGRESSIVE OUT to “OFF”.

•CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE.

IN CASE OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED TO SET PROGRESSIVE OUT TO “OFF”. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p DVD/VCR DECK, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.

1

Press A/V OPTIMIZER

ACTION

in Play mode to display

SELECT

 

the A/V OPTIMIZER

 

 

selection on-screen.

SET

 

• Display disappears after

 

 

 

5 seconds.

 

DVD Operation

2

Press A/V OPTIMIZER to select the desired mode below.

NORMAL CINEMA

ACTION DRAMA

A/V

OPTIMIZER

The video/audio effect of each mode is listed below.

Mode

Video

Audio

NORMAL

Standard video

Standard audio

CINEMA

Bright areas are subdued.

Enhances high/low range for

dynamic sound.

 

 

DRAMA

Standard video

Reduces high/low range so dialog

and vocals can be heard clearly.

 

 

 

 

 

ACTION

Brightness and sharpness are

Enhances high/low range for

enhanced.

dynamic sound.

 

 

 

 

Note

•With some discs, the audio/video effect may not be obtained, and the audio/video effects may not work well.

55

Page 54 Page 56
Image 55
Page 54 Page 56
Contents Model No. PV-D4745 / PV-D4745S Important Safeguards and Precautions Example FCC CautionRegion Management Information Inside of productBefore Using Table of Contents Disc formats supported by this Deck Deck & Cassette InformationPrevent Accidental Tape Erasure DVD-RAM discs Disc HandlingDVD SpecificationsInitial Setup Definition of Terms DVDBold Italic VCR and DVD Functions Remote ControlLocation of Controls Number keysFront View of Deck Reset All Memory FunctionsTo enjoy Progressive Scan video Rear View of DeckLight-up Indicators On Screen Displays / Light-up IndicatorsOn Screen Displays VCR Antenna or Cable ConnectionsBasic Connections DSS Receiver Deck TV Deck TV Cable Box Deck TVConnect With Two Cable Boxes Connections For DVD Only enjoying higher picture qualityOther Connections With a Cable Box Deck Cable Box TVFor your reference Ready ChecklistConnecting Amplifier 2ch stereo system Analog connection Audio ConnectionsAmplifier Subwoofer To Optical Digital Audio Input ConnectorTurn TV on Before doing Initial SetupInitial Setup Ready to Play Plug VCR Power plug into an AC wall outletIf Auto Clock Set was incomplete Manual Clock SetSET VCR To display Menu Reset Language, Channels, ClockPress Action to start Clock and exit this mode Press ActionBasic Operation VCR’s Output ChannelAdd or Delete a Channel DST Daylight Saving TimePlayback/ Record on a Tape Playback using Deck buttonsPlayback a Tape Insert a tape Record using Deck buttons To return to menu play stops Operation using Deck buttonsBasic DVD Operation Press OPEN/CLOSEResume Function Auto-Power Off FunctionS. Virtual Surround Sound Timer Recording Review, Replace or Clear Program Contents SAP broadcast Receivable Broadcast TypesPress Display MTS Stereo and SAP broadcast MTS Stereo broadcastAudio Mode for Playback Audio Mode for RecordingMulti-Brand Control Setup Multi-Brand Control FeatureUsing Multi-Brand Control Number keys TV Brand Code NumbersCommercial Skip Tape OperationIndex Search Zero SearchAuto Rewind Repeat PlayAuto Operation Functions Auto PlayAction Tape SelectTape Position Display Press SETWeak Signal Display Feature Special VCR FeaturesAuto Shut-Off Feature VCR / TV Action VCR/TV Selection FeatureTo select SET UP VCR To select Auto VCR/TVPlaying Source VCR Recording Editing Deck Copying Your Tapes DubbingPress SUB Title Disc OperationSubtitle Language DVD only Audio Soundtrack Language DVD onlyPress Angle Multiple Angle Viewing DVD onlyPicture Zoom DVD only DVD OperationTo select START, Program Play Video CD/CD onlyTo clear all programs Program Repeat Play Video CD/CD onlyPress Display to display Deck Information screen To clear the last program one by OneTo display To select Play ModeRandom Play Video CD/CD only To display DVD Main MenuDVD Menu DVD only Title Menu DVD onlyDo steps 1 ~ 3 on DVD-RAM Operation DVD-RAM onlyPlay a DVD-RAM Direct NavigatorPress Play List Play/Stop mode to display the Play List menuUsing Number keys starts playing automatically Play ListTo return to normal screen To select the setting, and press SETTo select an item, and press SET Press or Number keysDetailed Descriptions of each On-Screen Display DVD Operation using On-Screen Displays Press SET Surround see p V Optimizer see pPROGRAM/DISC Repeat Play DVD-RAM Program Repeat Play mode example see pCHAPTER/TITLE Repeat Play DVD-Video TRACK/DISC Repeat Play Video CD/CDPress Stop to stop play MP3 PlaybackDo steps 1~3 at left Press OPEN/CLOSE to closePress SET or Play Jpeg PlaybackJpeg Slide-show Do steps 1~3 onSet rotation Jpeg ZoomJpeg Rotation Set Zoom sizeDisc Languages DVD only Settings for DVD OperationDRC Dynamic Range Compression Selections Audio Output DVD onlyDolby Digital selections Dts selectionsTV Mode DVD only Still Mode DVD onlyExample Press A/V Optimizer Press A/V Optimizer to select the desired mode belowPress SET repeatedly For mode. See belowCode Language Language Code ListYour Remote Control Solution Before Requesting ServicePower Solution Recording & Playback SolutionMiscellaneous Solution DVD/ Video CD/ CD SolutionLimited Warranty Limits And Exclusions Limited WarrantyLimited Warranty Coverage Mail-In ServiceYou may also contact us directly at Customer Services DirectoryFor Your Information Npcparts@us.panasonic.comMedidasdeseguridadyprecaucionesimportantes Precauciones DE Seguridad Clock Para Ant/Cable DVD/VCR TVGrabación normal 030 Programación fácil para la grabación con temporizadorPara volver a la pantalla normal Operaciones básicas del DVDBúsqueda hacia atrás Para ver una imagen fijaVisión desde otro ángulo DVD solamente Fijaciones inicialesCambio del idioma de subtítulos Vídeo DVD solamente Selección de Idiomas DEL Disco DVD solamenteAmpliación de la imagen DVD solamente Utilización de un menú de títulos DVD solamenteCambio del idioma de la pista de sonido DVD solamente Utilización de un menú de DVD DVD solamenteFuncionamiento de la ejecución de MP3/JPEG Index Karaoke Vocal Selection for Karaoke Discs Video Out Title button Title Menu TV ModeClear button 49 ~LSQT0908 a

PV-D4745S, PV-D4745 specifications

The Panasonic PV-D4745 and PV-D4745S are advanced VCRs designed to deliver exceptional performance for home entertainment enthusiasts. These models, part of Panasonic's renowned line of video cassette recorders, boast a variety of features and technologies that cater to users seeking quality video recording and playback capabilities.

One of the standout features of the PV-D4745 and PV-D4745S is their advanced video processing technology, which ensures superior picture quality. These models utilize Panasonic's proprietary VHI technology, enhancing color accuracy and reducing noise for a clearer viewing experience. This is particularly noticeable in playback, where the vibrant details of your favorite films and shows come to life.

Another key characteristic is the built-in TBC (Time Base Corrector) functionality. This feature stabilizes video signals, correcting imperfections from previously recorded tapes. As a result, users can enjoy a smoother playback experience, minimizing jitter and other distortions commonly associated with older tapes.

The PV-D4745 and PV-D4745S also include a variety of convenient recording options. With their 4-head design, these VCRs offer the ability to record in SP (Standard Play) and LP (Long Play) modes, allowing users to choose between higher quality at a shorter duration or longer recording time at lower quality. Moreover, the programmable timer makes scheduling recordings straightforward, ensuring users never miss an episode of their favorite series.

In terms of connectivity, both models feature composite outputs that make them compatible with a variety of TVs and home entertainment systems, ensuring easy integration into any setup. Additionally, the VHS Hi-Fi audio system delivers high-fidelity sound, complementing the stunning visuals and enhancing the overall viewing experience.

The PV-D4745S model further includes enhanced features such as a sleek design with an easy-to-read display and intuitive controls, making operation user-friendly. Overall, the Panasonic PV-D4745 and PV-D4745S stand out as capable, reliable VCRs that bring together innovative technology and practical features for an optimal home video experience. These models are perfect for those looking to preserve memories on tape while enjoying the best possible playback quality.
Top Page Image Contents