Pelco DX7100 manual C642M 11/03

6EXIT Button Ð Exits Backup Viewer.

7Playback Buttons

8Close CD Tray Button Ð Closes CD tray. Playback must be stopped before button can be used. This button does not appear if you are viewing data from a hard drive.

9Open CD Tray Button Ð Opens CD tray. Playback must be stopped before button can be used. This button does not appear if you are viewing data from a hard drive.

10AVI Button Ð Creates and saves an AVI file to a selected drive. Playback must be stopped before button can be used. Refer to the AVI Backup section.

11Print Button Ð Prints image. Playback must be stopped before button can be used.

12FDD Button Ð Saves recorded image to a 3.5-inch diskette. Playback must be stopped before button can be used.

13Zoom/Contrast/Brightness Buttons Ð Adjust levels for recorded image. Use with single display playback only.

14Camera Button Ð Displays camera buttons.

Info Button Ð Displays the amount of data on the selected drive. Slider Button Ð Displays slider bars.

15Camera Buttons Ð Select cameras to view. The default setting of the DX7100 turns all cameras on. If you do not want to view all cameras, click a button to turn a camera off.

16Screen Division Buttons Ð Select single-camera or multiple-camera views. To select a single camera, click the button on the far right (X). This turns off all cameras. Then select the desired camera. A single camera must be selected before you can use the AVI, print, or FDD buttons.

52 C642M (11/03)