Pelco DX7100 manual Total FPS

Page 16

NOTE: Items 4-9 affect the Normal, Motion, and Sensor menus. They should be set only once.

4IMAGE QUALITY Slider Bar Ð Sets the quality of the recorded image. Image quality affects storage capacity and transmission rate. More bandwidth and storage capacity is required for high quality images.

5MOTION EXT. (Extended) DURATION Slider Bar Ð Sets recording time, from 1 to 180 seconds, after motion is detected.

6SENSOR EXT. (Extended) DURATION Slider Bar Ð Sets recording time, from 1 to 180 seconds, after a sensor is triggered.

7SWITCH SPEED Ð Sets the time, from 1 to 180 seconds, that cameras will sequence when the Sequence button is activated in the DISPLAY mode.

8BANDWIDTH THROTTLE Ð Sets the transmission rate for images sent to remote site users. Settings can be set from 0.5 to 10 Mbps in 0.5 Mbps increments. The default is 3 Mbps.

TRANSMISSION QUALITY includes high resolution of 320 x 240, medium resolution of 240 x 180 and low resolution of 160 x 120.

9BACKUP Ð Select to customize recording rates when backing up data to the internal CD-RW drive. DUPLEX Ð Select to customize recording rates during a search.

SIMPLEX Ð Select to customize recording rates during live viewing.

You must set the recording rates for all three modes. The DX7100 will select the recording rates automatically depending on the mode in which you are using the DVR.

10RECORDING SPEED Slider Bars Ð Control the recording rate of each camera by adjusting the control bar for each camera. The total available fps for all cameras varies per system mode setup (simplex, duplex, or backup). For more information, refer to the text following item 11.

11Average (A) Recording Rate Slider Bar Ð Equally distributes the total available recording rate to all enabled cameras. All enabled cameras are set to the same fps.

Example:

Total # of cameras

Total FPS

Average per camera

 

 

 

16

160

10

The total frames per second available to be distributed among all enabled cameras varies by the mode. In the simplex mode, the maximum recording speed is 120 fps (DX7008 models) and 160 fps (DX7116 models). For all models, the maximum in duplex mode is 60 fps and the maximum in backup mode is 40 fps.

The fps also is affected by the number of cameras enabled. In the example above, with all cameras enabled, the maximum fps per camera is 10. But with only eight cameras enabled, the maximum fps can be increased to 20. (You do not have to leave the cameras set for the maximum fps. You can use the individual slider bars or the averaging bar to change the fps.)

Another factor affecting fps is that cameras share bandwidth. Cameras 1 and 9, 2 and 10, 3 and 11, etc., share bandwidth. In Figure 5, cameras 1 and 9, for example, share 30 fps. (The maximum fps per pair of cameras is 30.) Because Camera 1 is turned off, Camera 9 gets all the bandwidth. But if Camera 1 is turned on (in the Camera menu), both cameras will be set for 15 fps.

16

C642M (11/03)

Page 15 Page 17
Image 16
Page 15 Page 17
Contents DX7100 Series Digital Video Recorder Contents AVI Backup Warranty and Return Information List of Illustrations Getting Started Display Mode Display ModeReturn to previous screen display System Setup System Setup MenusCamera Setup Color Setup Schedule Setup C642M 11/03 Scheduling Example Check SAT in the DAY of Week section C642M 11/03 Speed Setup Normal Speed MenuTotal FPS Motion Speed Menu Sensor Speed Menu Motion Detection Setup Password Setup PAN and Tilt Setup Update Program Import System ConfigurationExport System Configuration Quit to ExplorerHOW to Operate PTZ PTZ MenusPTZ Controls Presets PatternsPreset Tours HOW to Program a Preset TourHOW to RUN a Preset Tour HOW to Clear a Preset TourSearch 12 1110 9 8 7Playback Previous Image Next Image Stop Date and Time Search Slider Search Slider SearchIndex Search HOW to Backup Video Files Backup WindowHOW to Backup Copy to the CD-RW Drive Remote Site Software InstallationDescription Registered Site Setup 1112 1514HOW to Connect to a Remote Site HOW to SET UP a Registered SiteOn-Line Mode Remote Software OperationNine-camera display PTZ Control Mode Patterns AuxiliariesPresets How to Move to a PresetPreset Tours How to Run a Preset TourSearch Mode Page Date and Time Search Slider Search Software Update Remote UpdateConfiguration Update Emergency Agent Software HOW to Install the Backup Viewer Backup Viewer SoftwareHOW to Open the Backup Viewer C642M 11/03 13 12 11109 OperationC642M 11/03 Date and Time Search Slider Search Backup Viewer Index Search Click the Index Search button Blank Index List appearsWatermark Tool Watermark Tool OperationImage Has Not Been Altered AVI Backup AVI Backup-MPEG CodecWarranty and Return Information ISO9001
Related manuals
Manual 8 pages 59.49 Kb Manual 2 pages 43.89 Kb

DX7100 specifications

The Pelco DX7100 is a versatile and robust digital video recorder (DVR) designed for advanced security surveillance applications. It is primarily used in commercial and industrial settings, where continuous and reliable video recording is essential for overall security management.

One of the standout features of the DX7100 is its high storage capacity. With support for multiple hard drive configurations, the unit can store a significant amount of video data, ensuring that users have access to historical footage when needed. The device can handle multiple cameras, making it suitable for medium to large-scale facilities. It typically supports up to 16 camera inputs, giving it the flexibility to monitor various areas simultaneously.

The DX7100 employs advanced compression technologies, including H.264, which enables it to provide high-quality video while minimizing storage requirements. This efficiency is crucial for users who need to keep video files for extended periods without overwhelming their storage systems. The recording resolution can be adjusted to cater to different surveillance needs, providing options from standard quality to high-definition recording.

Another key characteristic of the Pelco DX7100 is its user-friendly interface. The system includes an intuitive graphical user interface, which simplifies the navigation and operation of the device. Users can easily configure settings, manage recorded video, and arrange camera views through a centralized control panel. The robust search capabilities allow for quick retrieval of recorded footage, enhancing productivity during investigations.

Remote access is another essential feature of the DX7100. Users can access the DVR from anywhere via networks, using computers or smartphones. This remote capability is invaluable for real-time monitoring and management, providing security personnel with the flexibility to respond swiftly to incidents.

Moreover, the DX7100 integrates well with other Pelco systems and accessories, enabling users to create a comprehensive and cohesive security system. Its compatibility with various camera types and formats means users can customize their surveillance setups according to specific security requirements.

In summary, the Pelco DX7100 is a powerful DVR solution that combines high storage capacity, advanced compression technology, user-friendly operation, and remote accessibility. Its flexibility and integration capabilities make it a preferred choice for businesses looking to enhance their security infrastructure.
Top Page Image Contents