Pelco DX7000 manual Patterns, Presets

PATTERNS

A pattern is a user-defined, viewable camera path with a definite beginning and end. The pattern can consist of any standard pan and tilt or lens commands. Once defined the pattern is easily activated with the press of an on-screen menu button. The pattern will run continuously until it is deactivated with another press of the menu button.

HOW TO PROGRAM A PATTERN

a.Click the PTZ button in the DISPLAY Mode. The PTZ Mode appears.

b.Select a camera.

c.Click P-SET and move the camera through a series of movements using the pan and tilt, zoom, and focus commands.

d.To stop programming the pattern, click the P-SET button.

e.To run the pattern, click the P-RUN button. To stop the pattern, click the P-RUN button.

HOW TO CLEAR A PATTERN

Programming a pattern will replace (clear) the pattern previously programmed.

PRESETS

A preset is a user-defined camera position using pan and tilt, zoom, and focus commands. The DX7000 Series DVR has programming capacity for 12 preset locations.

HOW TO PROGRAM A PRESET

a.Click the PTZ button in the DISPLAY Mode. The PTZ Mode appears.

b.Click PRESET.

c.Select a camera by moving the cursor to the desired camera view and clicking the left mouse button.

d.Move the camera to a desired position.

e.Click the SET button to turn it ON.

f.Click a preset button 1-12. To continue setting presets move the camera and click another preset button.

g.Click the SET button to stop programming preset positions.

NOTE: The selected camera is indicated by the number displayed in the center of the PTZ controls.

HOW TO MOVE TO A PRESET

a.Click MOVE.

b.Click a preset button 1-12. The camera moves to the programmed preset position.

HOW TO CLEAR A PRESET

a.Click CLEAR.

b.Click a preset button 1-12.

28 C665M-C (5/03)