REMOTE SOFTWARE PTZ CONTROL MODE
To operate pan/tilt/zoom functions on controllable systems, do the following:
a.Select a camera.
•Move the cursor to a camera screen view and
•A single camera view appears on the screen and the camera number (1 through 16) appears in the center of the pan and tilt control (refer to Figure 21).
b.
c.
d.
e.
Use the ▲ ▼ buttons to pan left and right.
Use the ▲▼ buttons to tilt up and down.
If required use the FOCUS settings
UP
LEFT
RIGHT
CAMERA
DOWN
00949
Figure 22. PTZ Controls
42 |
|