Pelco DX7000 manual Nine-camera display

6RELAY OUTPUT Buttons – Turn relays connected to DX7000 DVR ON/OFF.

7DOMAIN/IP ADDRESS Text Box – Displays address of domain site.

8SITE NAME Text Box – Displays name of domain site.

9Screen Division Buttons

	Single camera display		Displays cameras 1-9
			Not available in non-overlay mode
	Quad display, cameras 1-4	*	Displays cameras 10-16
			Not available in non-overlay mode
	Quad display, cameras 5-8	*	Displays all 16 cameras
			Not available in non-overlay mode
*	Quad display, cameras 9-12		Sequencing mode – Sequence using a single-, four-, or
	Not available in non-overlay mode		nine-camera display.
*	Quad display, cameras 13-16		Full-screen display – Removes menu bars from display. Click
	Not available in non-overlay mode		the right mouse button to return to previous screen display.

NOTE: You can also use the left and right mouse buttons to change the screen division.

Single Camera Display Using the Mouse – Move the cursor to a camera view, and click the left mouse button. A green rectangle appears around the selected view. Click the left mouse button again to display a single camera view of the selected camera. To return to the previous screen display, click of the left mouse button again.

Full-Screen Display Using the Mouse – Click the right mouse button anywhere on a camera scene to remove the menu bars from the display. Click the right mouse button again to return to the previous screen display.

*Settings are not available with DX7008 models.

C665M-C (5/03) 41