Table D. Image Resolutions (in Pixels)
NTSC Resolutions
4CIF | 704 x 480 |
|
|
2CIF | 704 x 240 |
|
|
CIF | 352 x 240 |
|
|
PAL Resolutions
4CIF | 704 x 576 |
|
|
2CIF | 704 x 288 |
|
|
CIF | 352 x 288 |
|
|
NOTES:
•The default setting for the DVR5100 frame rate was formerly Low 30/25, EnduraStor not enabled.
•The default setting for the DVR5100 frame rates is now Low 1 image/second, EnduraStor enabled after 12 hours.
Remote Client
The DVR5100 Remote Client has the following new features:
•Digital Zoom Controls
•Synchronization in Quick Search
DIGITAL ZOOM CONTROLS
Similar to controlling PTZ on a camera, digital zoom controls let you zoom in on specific areas of the video that you are viewing. Digital zoom controls work on any video, not just on video recorded on a camera that supports PTZ functions. This feature is also available while viewing exported video with the Endura Player. To use digital zoom controls, you must be viewing video from a camera in single view (1 x 1).
1.Select a camera and switch to a 1 x 1 view.
2.Click the Digital Zoom button 
. The view displays the video with a picture within the picture.
3.Click the mouse anywhere in the view, and then roll the center wheel of the mouse away from you to zoom in. To zoom out of the picture, roll the center wheel of the mouse toward you.
To zoom in or out on a different area of the scene, press and hold the left mouse button anywhere in the picture, and then move the mouse in any direction. A white frame inside the smaller picture indicates which part of the video you are working with.
Figure 5. Digital Zoom Sample
10 | C2669M (4/07) |