Auto Login
The DVR5100 comes with four pre-defined user profiles: Administrator, Manager, Operator, and Guest. The first time you start the DVR5100, the system automatically logs in using the admin user after 60 seconds if an operator does not select a specific user at the login screen. This feature allows the system to automatically log in as the designated user each time the DVR is rebooted (for example, after a power failure or when the unit is restarted for any purpose). You can enable or disable the feature from the System Configuration screen. In addition, you can choose a specific user for subsequent log ins.
NOTE: As a security precaution, you should change the user ID for auto-login as part of the configuration and setup process. Consider selecting Guest as the default user ID or create a new user ID and password with limited access. Using a Guest user assures that system settings are not accessible inadvertently.
Table B lists the default user IDs and passwords. Figure 3 shows the login screen.
Table B. Default User IDs and Passwords
User ID | Password |
| |
admin | admin or 23646 |
| |
manager | manager or 6262437 |
| |
operator | operator or 67372867 |
| |
guest | guest or 48378 |
| |
Figure 3. Auto Login Menu
