Pelco C2669M manual Press the buttons on the Panel Keypad as follows, Shift, Then

3.When the Execute Script dialog box appears, turn the jog (inner dial) to scroll through and select a script from the list (Figure 43).

4.Press the buttons on the Panel Keypad as follows:

•	To start a script, press the green function key			, or use the joystick to navigate to the Execute icon		, and then press Enter/
	Shift	.
•	To stop a script, press the yellow function key			, or use the joystick to navigate to the Halt icon		, and then press Enter/
	Shift	. Note that the Halt icon is available only when a script is running.
•	To close the dialog box without running a script, press the red function key				, or navigate to the Cancel icon		, and then
	press Enter/Shift		.

Figure 43. Execute Script Dialog Box

C1696M (8/06) 39