Formatting
The DX4500/DX4600 automatically detects when a new drive is installed or when a current drive is switched to a different SATA connector. After the DX4500/DX4600 starts, the system prompts you to format the newly installed drive. Drives that have not been switched to a different SATA connector are not reformatted.
WARNING: Before initiating a format procedure, verify that the drives are reinstalled in the same position and reconnected to their orginal SATA connectors. For information, refer to Before You Begin on page 6 and the DX4500/DX4600 server operation/programming manual (C2674M).
1.On the front panel or remote control, press and hold the Power button until your hear a beep, and then release the button. After a few seconds, the DX4500/DX4600 startup screen appears.
2.Wait until the DVR displays the “HDD configuration has been changed” dialog box in the application window.
Figure 15. Application Window and GUI Toolbar
16 | C2676M (9/07) |