3.Thread the wiring through the wall mount, and then attach the mount to the adapter plate:
a.Locate the mount hooks in the mount. Hang these hooks onto the adapter plate guides.
b.Make sure all wires are enclosed in the mount.
c.Rock the mount into place.
.
3a
3b
3c
Figure 2. Attaching the Mount
4.Lock the mount:
a.Locate the slide lock at the base of the mount. Slide it to the right to secure the mount.
b.Turn the locking screw counterclockwise until the slide lock is secured.
4a
4b
Figure 3. Locking the Mount
4 | C2234M (2/07) |