5.Connect the video cable/wires to the IS90 back box:
BNC: Connect the BNC connector from the unit to a mating BNC connector.
Twisted Pair (UTP): Blue wire = Video +
Gray wire = Video –
6. | Connect the power wires. |
|
| |
|
|
|
|
|
| Voltage | Red Wire | Black Wire |
|
| 12 VDC | + | Ground |
|
| 24 VAC | ~ | ~ |
|
7. | Use the provided mounting screws and attach the back box to the mount. | |||
8. | To position and adjust the camera, and to install the liner and bubble, refer to the Installation | |||
| and Operation manual supplied with the IS90 Camclosure integrated camera system. | |||
C2234M (2/07) | 5 |