Sony KDL-26E40xx, KDL-32E40xx, KDL-32W40xx 25 GB, Timer Settings, Set-up, Auto Start-up, Language

x.v.Colour (except for

KDL-32W4xxx, KDL-32E4xxx, KDL-26E4xxx, KDL-37V4xxx, KDL-32V4xxx, KDL-26V4xxx)

Displays moving pictures that is more faithful to the original source by matching the colour space of source.

~

•The setting is fixed to “Normal” when the input signal is HDMI (RGB), even if “x.v.Colour” is selected.

•Only available for HDMI 1, HDMI 2, HDMI 3 and Component in format 720p, 1080i or 1080p.

Photo Colour Space (except for

KDL-32W4xxx,

KDL-32E4xxx,

KDL-26E4xxx,

KDL-37V4xxx,

KDL-32V4xxx,

KDL-26V4xxx)

Selects the option (sRGB, sYCC, Adobe RGB) to match the output colour space within the output signal from the equipment connected to the HDMI, component input jacks or USB.

~

•Select “sYCC” when using the equipment that supports “x.v.Colour”.

•Only available for HDMI 1, HDMI 2, HDMI 3 and Component in format 1080i or 1080p.

•Not available when “Colour Space” is set to “Wide” (page 23).

Timer Settings	Sets the timer to turn on/off the TV.
	Sleep Timer
	Sets a period of time after which the TV automatically switches itself into
	standby mode.
	When the Sleep Timer is activated, the (Timer) indicator on the TV (front)
	lights up in orange.
	z
	•	If you switch off the TV and switch it on again, “Sleep Timer” is reset to
		“Off”.
	•	“Sleep timer will end soon. Power will be turned off” appears on the screen
		one minute before the TV switches to standby mode.
	On Timer Settings
	“On Timer”: Sets the timer to turn on the TV from standby mode.
	“Timer Mode”: Selects the desired period.
	“Time”: Sets the time to turn on the TV.
	“Duration”: Selects the time period after which the TV automatically switches
	to standby mode again.
	Clock Set
	Allows you to adjust the clock manually. When the TV is receiving digital
	channels, the clock cannot be adjusted manually since it is set to the time code of
	the broadcasted signal.
Set-up
Auto Start-up	Starts the “first time operation menu” to select the language, country/region and
	location, and tune in all available digital and analogue channels. Usually, you do
	not need to do this operation because the language and country/region will have
	been selected and channels already tuned when the TV was first installed
	(page 6). However, this option allows you to repeat the process (e.g., to retune
	the TV after moving house, or to search for new channels that have been
	launched by broadcasters).
Language	Selects the language in which the menus are displayed.

Continued

Using MENU Functions

25 GB