Sony KDL-32V47xx, KDL-32E40xx, KDL-32W40xx, KDL-32V45xx, KDL-40E40xx manual 28 GB, Analogue Set-up

Analogue Set-up

Programme List	Select “Off” to hide the list of analogue channels from the XMBTM (Xross Media
Display	Bar).
Auto Tuning	Tunes in all the available analogue channels.
	This option allows you to retune the TV after moving house, or to search for new
	channels that have been launched by broadcasters.
Programme Sorting	Changes the order in which the analogue channels are stored on the TV.
	1 Press F/f to select the channel you want to move to a new position, then
	press .
	2 Press F/f to select the new position for your channel, then press .

Manual Programme Preset

Before selecting “Label/AFT/Audio Filter/LNA/Skip/Decoder”, press PROG +/– to select the programme number with the channel. You cannot select a programme number that is set to “Skip” (page 26).

Programme/System/Channel

Presets programme channels manually.

1Press F/f to select “Programme”, then press .

2Press F/f to select the programme number you want to manually tune (if tuning a VCR/ DVD recorder, select channel 00), then press RETURN.

3Press F/f to select “System”, then press .

4Press F/f to select one of the following TV broadcast systems, then press

RETURN.

B/G: For western European countries/regions

I:For the United Kingdom

D/K: For eastern European countries/regions

L:For France

5Press F/f to select “Channel”, then press .

6Press F/f to select “S” (for cable channels) or “C” (for terrestrial channels), then press g.

7Tune the channels as follows:

If you do not know the channel number (frequency)

Press F/f to search for the next available channel. When a channel has been found, the search will stop. To continue searching, press F/f.

If you know the channel number (frequency)

Press the number buttons to enter the channel number of the broadcast you want or your VCR/ DVD recorder channel number.

8Press to jump to “Confirm”, then press .

9Press f to select “OK”, then press .

Repeat the procedure above to preset other channels manually.

Label

Assigns a name of your choice, up to five letters or numbers, to the selected channel. This name will be displayed briefly on the screen when the channel is selected.

To input characters, follow steps 1 to 3 of “Edit:” (page 26).

AFT

Allows you to fine-tune the selected programme number manually if you feel that a slight tuning adjustment will improve the picture quality.

You can adjust the fine tuning over a range of –15 to +15. When “On” is selected, the fine tuning is performed automatically.

28 GB