Sony Comprehensive Manual for Flat Panel Televisions - AV Set-Up and More

AV Set-up	AV Preset	Assigns a name to any equipment connected to the side and
		rear sockets. The name will be displayed briefly on the screen
		when the equipment is selected. You can skip an input source
		that is not connected to any equipment.
		1	Press F/f to select the desired input source, then press
		2	.
			Press F/f to select the desired option below, then press
			.

-, CABLE, SAT, Uses one of the preset labels to assign a VCR, DVD/BD, name to connected equipment.

GAME, AUDIO

SYSTEM, CAM,

PC

Edit	Creates your own label.
	1	Press F/f to select the desired letter
		or number (“_” for a blank space),
		then press g.
		If you input a wrong character
		Press G/g to select the wrong
		character. Then, press F/f to select
	2	the correct character.
		Repeat the procedure in step 1 until
	3	the name is completed.
		Select “OK”, then press .

	Skip		Skips an input source that is not
			connected to any equipment when you
			press F/f to select the input source.
AV2 Input	Sets a signal to be input through the socket labelled				/
	/	AV2 on the rear of the TV.
	Auto		Switches automatically among the signals
			of RGB input, S Video input, Composite
			video input depending on the input
			signal.
	RGB		Inputs the RGB signal.
	S Video		Inputs the S Video signal.
	Composite		Inputs the Composite video signal.
AV2 Output	Sets a signal to be output through the socket labelled				/
	/	AV2 on the rear of the TV. If you connect a
	VCR/ DVD recorder or other recording equipment to the
	/	/	AV2 socket, you can then record from the
	equipment connected to other sockets of the TV.
	TV		Outputs a broadcast.
	Auto		Outputs whatever is being viewed on the
			screen (except signals from the HDMI IN
			1, HDMI IN 2, HDMI IN 3,		/
			COMPONENT IN and	/	PC IN
			sockets).

40 GB