Sony KDL-46W4500, KDL-52W4500, KDL-40W4500 installation instructions 42 GB, Analogue Set-up

All Reset	Resets all settings to the factory settings and then displays the “Auto Start-up”
	screen.
	z
	• Be sure not to turn the TV off during this period (it takes about 30 seconds) or
	press any buttons.
	• All settings, including digital favourite list, country, language, auto tuned
	channels, etc. will be reset.

Analogue Set-up

Programme List	Select “Off” to hide the list of analogue channels from the XMB™
Display	(XrossMediaBar).
Auto Tuning	Tunes in all the available analogue channels.
	This option allows you to retune the TV after moving house, or to search for new
	channels that have been launched by broadcasters.
Programme Sorting	Changes the order in which the analogue channels are stored on the TV.
	1	Press F/f to select the channel you want to move to a new position, then press
	2	.
		Press F/f to select the new position for your channel, then press .

Manual Programme Preset

Before selecting “Label”/“AFT”/“Audio Filter”/“LNA”/“Skip”/“Decoder”, press PROG +/– to select the programme number with the channel. You cannot select a programme number that is set to “Skip” (page 40).

System/Channel Presets programme channels manually.

1Press F/f to select the programme number you want to manually tune (if tuning a VCR/ DVD recorder, select channel 00), then press .

2Press F/f to select “System”, then press .

3Press F/f to select one of the following TV broadcast systems, then press .

B/G: For western European countries/regions

I:For the United Kingdom

D/K: For eastern European countries/regions

L:For France

4Press F/f to select “Channel”, then press .

5Press F/f to select “S” (for cable channels) or “C” (for terrestrial channels), then press g.

6Tune the channels as follows:

If you do not know the channel number (frequency)

Press F/f to search for the next available channel. When a channel has been found, the search will stop. To continue searching, press F/f.

If you know the channel number (frequency)

Press the number buttons to enter the channel number of the broadcast you want or your VCR/DVD recorder channel number.

7Press to jump to “Confirm”, then press . Your changes have been saved. Repeat the above procedure to preset other channels manually.

Label	Assigns a name of your choice, up to five letters or numbers,
	to the selected channel. This name will be displayed briefly
	on the screen when the channel is selected.
	To input characters, follow steps 1 to 3 of “Edit” (page 40).

42 GB