Sony KDL-40W4500, KDL-46W4500, KDL-52W4500 installation instructions 44 GB

Programme Removes any unwanted digital channels stored on the TV,

Sorting and changes the order of the digital channels stored on the TV.

1

2

3

Press F/f to select the channel you want to remove or move to a new position.

You can also select a channel by pressing the number buttons to enter its three-digit channel number.

Remove or change the order of the digital channels as follows:

To remove the digital channel

Press . After a confirmation message appears, press G to select “Yes”, then press .

To change the order of the digital channels

Press g, then press F/f to select the new position for the channel and press G.

Press RETURN.

	Digital Manual	Tunes the digital channels manually. This feature is available
	Tuning	when “Digital Auto Tuning” is set to “Antenna.”
		1 Press the number button to select the channel number
		you want to manually tune, then press F/f to tune the
		channel.
		2 When the available channels are found, press F/f to
		select the channel you want to store, then press .
		3 Press F/f to select the programme number where you
		want to store the new channel, then press .
		Repeat the above procedure to manually tune other channels.
Subtitle Set-up	Subtitle Setting	When “For Hard Of Hearing” is selected, some visual aids
		may also be displayed with the subtitles (if TV channels
		broadcast such information).
	Subtitle	Allows you to select the language of the subtitles.
	Language
Audio Set-up	Audio Type	Switches to broadcast for the hearing impaired when “For
		Hard Of Hearing” is selected.
	Audio Language	Selects the language used for a programme. Some digital
		channels may broadcast several audio languages for a
		programme.
	Audio	Provides audio description (narration) of visual information if
	Description	TV channels broadcast such information.
	Mixing Level*	Adjusts the TV main audio and Audio Description output
		levels.
	Dynamic Range	Compensates for differences in the audio level between
		different channels. Note that this function may have no effect
		for some channels.
	Optical Out	Selects the audio signal that is output from the DIGITAL
		AUDIO OUT (OPTICAL) terminal on the rear of the TV. Set
		to “Auto” when equipment compatible with Dolby Digital is
		connected, and set to “PCM” when non-compatible
		equipment is connected.
	z
	* This option is only available when “Audio Description” is set to “On.”
Radio Display	Displays the screen wallpaper when you listen to a radio broadcast.
	You can select the screen wallpaper colour, display a random colour or view a
	slide show (page 26, 30).
	To cancel the screen wallpaper display temporarily, press any button.

44 GB