Sony KDS-60A2000 Screen Projection Lamp, Cleaning the Screen Surface, Temporary Image Retention

Getting Started

Screen

Projection Lamp

To minimize reflection, the screen surface has a special coating.

Inappropriate cleaning methods could damage the screen surface. Special care is required.

Cleaning the Screen Surface

Dust and dirt on the screen can affect the picture quality. To dust off the

screen use a soft cloth. Be sure to follow the cleaning instruction on page 6 for stubborn stains and dirt.

Temporary Image Retention

When high contrast non-moving images such as station logos and channel numbers are displayed for a long period of time, there may be some image retention on the screen. This is only a temporary condition. Tnrning off the power for a while or letting the TV run on another channel will eliminate the retained image.

Your TV uses a projection lamp as its light source. As with any lamp, it has a lifespan and needs to be replaced when the LAMP LED blinks or the screen becomes darker. Your TV also has a function to display a message "Projection lamp is nearing end of life. Please replace the lamp." to let you know that the lamp has reached its expected lifespan. Note the following:

[] After turning on your TV. it may take a while (l minuteorless) before the picture appears.

[] When the projection lamp wears out, the screen goes dark. Replace the lamp with a new Sony XL-5200 replacement lamp (not supplied).

[] After the lamp is replaced, set the Lamp Replacement option in the Setup settings (see page 47).

_ Until you Set the Lamp Replacement Option; a message announcing

that the lamp is at the end of its life will appear every time you turn On

'/_ The light emitted Irom the lamp iS quite bright when your TVis in use, To avoid eye discomfort or injury, do not look !nto the !!ght housing when

the power ison.

10