Sony KDS-55A2000 manual Cable System and VHF/UHF Antenna, Cable Box/Digital Cable Box Antenna

Getting Started

Connecting the TV

Cable System and VHF/UHF Antenna

System

To display clear crisp pictures, you must connect your TV correctly and select the correct Wide Mode to display the picture in the correct aspect ratio (see "Changing the Wide Screen Mode" on page 25). It is strongly

recommended that you connect the antenmdcable input using 75-ohm coaxial cable to receive optimum picture quality signal. A 300-ohm twin lead cable can be easily affected by radio noise and the like, resulting in

signal deterioration. If you use a 300-ohm twin lead cable, keep it as far away from the TV as possible. Do not use an indoor antenna, which is especially susceptible to radio noise.

You can also connect a variety of optional equipment to your TV (see page

15). For multiple equipment connections, please refer to the separate Quick Setup Guide.

	VHF/_HF
CATV cable	Antenna cable
	o;,_,E

Cable Box/Digital Cable Box and

Antenna

_" To change channels using the cable box, set your TV to channel 3 or 4 depending on the cable box channel output.

f:_ Press ANTtoswitch between VHF/UHF and cable.

Use this hookup if

I_1 Your cable company scrambles some channels, such as premium channels. Viewing all channels requires a cable box.

I_1 You do not intend to hook up any other audio or video equipment to your TV.

CATV cable

i o

Cab,eboxCoaxiall

CABLE

Rear of TV

'/_ To set up the TV remote control see '!Programming the Remote Contr01, on page 26_

,/_ Press SAT/CABLE to begin operating the cable box with the remote control (see page 22). The indicat0r wil light up.

/_ Press ANTtoswitch between VHF/UHF and cable.

14