5. PIP and Time Shifted Recording
5.1 Picture-in-Picture (PIP) Screen
If you press the PIP button on the remote control while watching TV, you can watch two channels at the same time. The audio from the main screen will be outputted.
Each time you press the PIP button, the PIP screen moves in order of 1:6 1:1 Normal, as displayed in the following figure.
SOURCE | TV/RADIO | WIDE |
A B
PIP
Zoom In
1:6 PIP screen | Normal screen | 1:1 PIP screen |
Note:
•The PIP screen is available only when you are watching TV channels. You cannot use the PIP function for radio channels.
•The teletext is only available on the main screen.
1. Swapping the PIP Screen
This function is available in 1:6 PIP or 1:1 PIP.
Press the SWAP button on the remote control to swap the main screen for the PIP screen. Press the CH+/CH- button to change the main screen channel.
Note: You cannot use the SWAP function in the following cases:
1.When you are watching a radio channel.
2.When the screen displays the channel list, audio and detail information.
SOURCE | TV/RADIO | WIDE |
A B
SWAP
Zoom In
GB27
User’s Manual