11. Software Update
11.2 Updating Software from Menu
You can set update software automatically.
1.Press the MENU button.
2.Select Installation using the / button and press the OK or button.
3.Enter the password using the
4.Select Software Update using the / button and press the OK or button.
5.Automatically search for new software. Select Cancel and press the OK button to finish search.
6.When detecting software update, the following result is displayed.
7.Select Yes and press the OK button to start updating. Select No and press the OK button to return to the previous menu without updating.
8.When completing the software update, the product is automatically powered off and on again.
Note: The default password is 0000. If you have forgotten the password, please contact your local product distributor.
GB64
User’s Manual