Humax iPVR-9200C Recording, Additional Time Shift Operations, Direct Jump, Instant Replay, GB31

5. PIP and Time Shifted Recording

5. Recording

Press the RECORD button on the remote control to record the current programme immediately. While the time shift operation records the programme temporarily, this record operation records the programme permanently so you can playback the recorded programme at any time. For more information about recording, refer to Chapter 6. Recording and Playback.

Adjusting the Recording End Time

Press the RECORD button while recording to adjust the recording end time. You can adjust the recording end time by -/+10 minutes using the ￿/￿ button, and then press the OK button to change the recording end time and hide the message screen.

6. Additional Time Shift Operations

You can perform additional time shift operations using the following buttons on the remote control.

Direct Jump

Press the PLAY button while watching TV. If you press the ￿/￿ button, a moving arrow will appear in the progress bar. Move this arrow to a time point using the ￿/￿ button to play the programme from the specified time point.

You can also move to the specified time point directly by entering the time you want using the NUMERIC(0-9)buttons while playing back a recorded program

Instant Replay

Press the INSTANT REPLAY button to jump back and play from that location. When the replay has been completed the programme will play from the current point. Refer to 9.5 Miscellaneous Settings.

LIST 0

OPT+

MENU GUIDE

Zoom In

OK

GB31

User’s Manual