Hitachi VT-FX631A-VT-FX632A Automatic Mode VT-FX632Aonly, Automatic mode See pages, Manual mode

goes out t'or move [han I hmtr, W_en you first phzg ]_ the VCR or after a power outage, [he clock display _i]] read "--:--',

Methods for setting the clock installed with these VCR's

For VT-FX632A use method A or B.

For VT-FX631A use method B.

Automatic mode See pages 17-19.

]he following is the method for setting the clock with auto clock set function. Auto clock set function

This function sets the VCR'sclock autonatically when the VCR is tuned to a station which transmits a time signal together with TV programs,

It a/so automatically sets the time differences between various time zones and sets the time during Daylight Saving Time (DS,T). The auto clock set function operates each time the VCR is turned off,

-Some broadcast stations may not transmit a time signal. The auto clock set function does not operate

when the VCR is tuned to a station which does not transmit a time signal. In this case, set the clock

manually (See page 20),

-When the clock is set automatically, the displayed time may drift from the current time by up to one

minute.

Manual mode

_ith this method, input the time and date following the clock setting screen.

IAutomatic Mode (VT-FX632Aonly)

If your VCR's hooked up to an antenna or cable without a without a cable box (Hookups A, B, C or D)

1 Press the POWER button to turn the VCR power off,

If[he VCR is already mined off, press [he ?OVV_R button to tl_n [he power on, [hen press it

again to mrn the power off. The dine will appear in [he VCR display to Show that the C_lrrent

time has been set. The automatic dock set procedure ra]ght take about 5 minutes.

17