• About the VCR Plus+ system
This handy feature makes timed recording a snap. You don'tneed to enter the specific channel, date, time or duration of a program. All you enter is its PlusCode programming number - a number of up to eight digits. This special code is easy to find in your favodte TV program guide or daily newspaper. Here'sa sample page from TV
Guide showing PlusCode numbers next to each program.
Your local channels may be different from the VCR Plus+ channel codes. To get ready to record with the VCR Plus+ system you need to assign your local broadcast and cable channel numbers to the VCR Plus+ channel codes already stored in your VCR'smemory. This is called channel setup and you do it using the
VCR Plus+ and PlusCode are trademarks of Gemstar Development corp.
•Channel setup
Before you begin
1Look for a listing like this one in your local "iV program guide or Sunday newspaper "iV section. Notice the small numbers to the right of the station name.
These are the VCR Plus+ channel numbers that you will use in the channel setup procedure.
2Make a list of the VCR Plus+ channel numbers and the channel numbers you are receiving them on. If there are any difference, YOUR channel numbers must be assigned to the corresponding VCR Plus+ number. (See Example)
51