GoVideo D640 manual Basic TV Connections, Enhanced Video Connections

2 - Connections

Basic TV Connections

You can connect the DVD player to a standard

television using the player’s Audio and Video

jacks.

1Connect the supplied audio cable (red and white) from the Audio jacks on the rear

of the player to the Audio Inputs on your television.

2Connect the supplied video cable (yellow) from the Video jack on the rear of the player to the Video Input on your television.

3Set your TV to its appropriate Video input to view the player.

DVD Player

L
Y	Pb	Pr
R
AUDIO COAXIAL	VIDEO	S-VIDEO OPTICAL

White Red Yellow

AUDIO IN VIDEO IN

TV

Enhanced Video Connections

For improved picture quality, you can connect the DVD player to a TV

equipped with S-Video, Component Video, or Progressive Scan inputs. These connections require special S-Video or Component Video cables (not included). For audio, choose one of the Enhanced Audio Connections shown on page 10.

S-Video Connections

1Connect an S-Video cable (not included) from the S-Video jack on the rear of the player to the S-Video input on your television.

2Set the Video Output to S-Video in the player’s System Setup menu.

3Set your TV to its S-Video input to view the player.

DVD Player

L
Y	Pb	Pr
R
AUDIO COAXIAL	VIDEO	S-VIDEO OPTICAL

Component	OR	S-Video
Video
Y	Pb Pr	S-VIDEO IN

TV

Progressive Scan/Component Video Connections

1Connect a Component Video cable (not included) from the Component jacks (Y, Pb, Pr) on the rear of the player to the Progressive Scan or Component Video inputs on your television.

2Set the Video Output to Progressive Scan (P-SCAN) or Component Video (INTERLACE) in the player’s System Setup menu.

•Note: You can also press the PROG.SCAN button as a shortcut to switch between Progressive Scan, Interlace Scan and S-Video modes.

3Set your TV to its Progressive Scan or Component Video input to view the player.

9