JVC XL-MV33BK Using the remote control, Using stereo headphones, Connecting stereo headphones

Using stereo headphones

Connecting stereo headphones

Connect stereo headphones to the PHONES jack at the lower-left of the front panel. The volume level is fixed and cannot be adjusted.

PHONES

BASIC OPERATIONS English

Using the remote control

Presetting the remote control to operate your own TV

You can use the Player’s remote control unit to control some functions on your TV set (e.g., turning the TV on and off, adjusting volume, or selecting channels). First, though, you must preset the remote control to make it compatible with your TV.

Operation

1.Check the Preset Code Table (page 10) to determine the two- digit brand code number for your TV.

2.While holding down the TV/VIDEO/SPATIALIZER button on the remote control, press the Number keys to insert the two-digit brand code number. (For example, if the code number is "28", press Number key 2, then 8. If the first digit is a "0", press 10. Thus, if the code number is "09", press Number key 10, then 9. If the code number is "10", press Number key 1, then 10. If it is "20", press Number key 2, then 10.)

Notes

•Before the remote control unit leaves the factory, the brand code number is set as No. 01 (JVC).

•Depending on your television set’s age and other factors, brand code numbers may be different from those shown in the table. In such a case, try out other codes until you find one that corresponds to your television.

3.While still holding down the TV/VIDEO/SPATIALIZER button, press the STOP button on the remote control.

TV/VIDEO	STOP
SPATIALIZER

+

4.The TV is turned off if the code number is correct. Repeat the procedure from the beginning if you weren’t successful the first time.

Page 9